Any recommendation on chiller for 2 feet tank? (60x45x45)

[obduty01]

Looking to get a chiller for new tank setup (2 feet ~ 60x45x45 ~120L). Currently have eheim ecco pro 200 which is about 600L/hr, is my filter flow rate enough? And for my tank size what is the recommend model and hp size for a chiller?

Hope to get some advise. Thanks!

[hann]

You can get a 1/8 or 1/10 HP
I would recommend the following:
If you choose hailea, you can either get a HS-28A or HC150.
For resun, you can get CL280
As for teco, TR10.
As for your filter, I think the flow may be too low after connecting with any of the chillers mentioned above especially if you have media in the filter.
I am currently using Ehiem 2026 connected to teco tr10. Flow just nice for my 60x40x40 tank.

[chipset]

My last setup was a HC150 with Ehiem 2028.

You might need a lily pipe to reduce the outflow rate.

[SunDragon]

Using HS-28A slight noise can be heard at night. But not too bad since my tank is at living room.Not sure whether there are any chiller that are much quieter.

[siatc]

The flowrate is barely sufficient. You need o consider the twist and turn of the piping, filter media etc

[freyster]

I am using a hc300a for my 2 footer but it'. Width is 30cm