Maybe before I do so... I'll try to drain some water from the reactor to release the water pressure and see if it works...
Sent from my SM-N9005 using Tapatalk
This particular pc of valve has been used since day 1 so the sticker is definitely correct as previously the back flush of water will be pushed back by co2 when the solenoid is on... I'll go try another pc of valve and update
Sent from my SM-N9005 using Tapatalk
Ludwigia glandulosa / Eleocharis acicularis 'Mini' / Rotala wallichii / Cyperus Rotundus / Rotala Sp. Sunset / Rotala Sp. Green
Cardinal Tetra / Rummynose Sp. Platinium / L183 Stralight Bristlenose Pelco / Nirate Snail / Yamato Shrimps
Maybe before I do so... I'll try to drain some water from the reactor to release the water pressure and see if it works...
Sent from my SM-N9005 using Tapatalk
Ludwigia glandulosa / Eleocharis acicularis 'Mini' / Rotala wallichii / Cyperus Rotundus / Rotala Sp. Sunset / Rotala Sp. Green
Cardinal Tetra / Rummynose Sp. Platinium / L183 Stralight Bristlenose Pelco / Nirate Snail / Yamato Shrimps
Also check all the tube connections from the bubble counter to the check valve (ie. use soapy water test method), if there is Co2 gas leaking from any of the connections, the gas pressure wouldn't build up high enough to overcome the check valve.
Yeah jus did that on all connection.. no bubbles...
Sent from my SM-N9005 using Tapatalk
Ludwigia glandulosa / Eleocharis acicularis 'Mini' / Rotala wallichii / Cyperus Rotundus / Rotala Sp. Sunset / Rotala Sp. Green
Cardinal Tetra / Rummynose Sp. Platinium / L183 Stralight Bristlenose Pelco / Nirate Snail / Yamato Shrimps
Update: found the problem, a leaky top cover(bubble counter).
On 1st try did not see the soap water bubbling as the leak was facing away from my view.
Rectification: used PTFE tape on thread grove.
Tested the co2 this morning and it has resumed back to normal
Thanks for the input.
Sent from my SM-N9005 using Tapatalk
Ludwigia glandulosa / Eleocharis acicularis 'Mini' / Rotala wallichii / Cyperus Rotundus / Rotala Sp. Sunset / Rotala Sp. Green
Cardinal Tetra / Rummynose Sp. Platinium / L183 Stralight Bristlenose Pelco / Nirate Snail / Yamato Shrimps
Aqua gardening and fish-keeping are actually two separate hobbies by themselves, in that each requires conflicting needs as the other. A tank full of plants requires plenty of CO2 to flourish, whereas a tank of fish will die when CO2 is predominantly present. What fish and the filter bacteria need is plenty of oxygen.
Thus, one can easily see that one cannot have one's cake and eat it. That is why aqua gardeners only have a minimal of and only small fish in ther plant tanks. On the other hand, a tank of fish requires abundant oxygen to thrive well. For this reason, plants must be minimised. Also, any CO2 supplementation with reactors is detrimental to fish health. Hobbyists often overlook this important fact.
Last edited by tetrakid; 7th May 2016 at 09:21.
LIFE IS UNBEARABLE WITHOUT A FISH TANK!!!
Bookmarks