Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Page 3 of 3 FirstFirst 123
Results 41 to 47 of 47

Thread: mixing

  1. #41
    Join Date
    Jun 2005
    Location
    港脚
    Posts
    577
    Feedback Score
    1 (100%)
    Country
    Singapore
    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Quote Originally Posted by d2hpeter
    Got a question, rightnow am using about 4.5W/gal of lighting [existing hood w a 18W PL] is this ok for the run-in period? might change to a blue-white combination to hv a better color hue.
    Do u mean during cycling? If so, I'll not even bother to on the lights during cycling.

    JC

  2. #42
    Join Date
    Jun 2005
    Location
    港脚
    Posts
    577
    Feedback Score
    1 (100%)
    Country
    Singapore
    Quote Originally Posted by d2hpeter
    Ah...I see. Sorry, didn't read properly. thanks for enlightenment.
    Ya, this is definitely more reliable.
    btw, is it available at the usual lmfs and roughly how much?
    Off my head, I only know http://www.eaquanature.com/store/def...hp?cPath=40_60 have them.

    Cheers
    JC

  3. #43
    Join Date
    Jun 2005
    Location
    港脚
    Posts
    577
    Feedback Score
    1 (100%)
    Country
    Singapore
    Quote Originally Posted by Darylyap
    Done that tonight liao, hopefully it will detach... thanks for idea!
    Gd luck, bro.

    Cheers
    JC

  4. #44
    Join Date
    Jun 2005
    Location
    港脚
    Posts
    577
    Feedback Score
    1 (100%)
    Country
    Singapore
    Quote Originally Posted by d2hpeter
    got another doubt.
    there are 4 metallic screws in the light hood holding a acryllic cover over the lights. For my previous FW use there wasnt any rust on it. would there be a corrosion problem with SW? and anyway of preventing rust dropping into the water if it does corrode? can i put an aluminium tape over it?
    Eventually it will rush. Maybe try silicon over the screw instead.

    JC

  5. #45
    Join Date
    Jun 2005
    Location
    港脚
    Posts
    577
    Feedback Score
    1 (100%)
    Country
    Singapore
    Quote Originally Posted by d2hpeter
    for the MarineEnvironment Salt that i am using, there is a separate bottle that is included in the bag that contain additional elements.
    I had actually used only a third of the salt as my tank is small.
    For the liquid in the bottle, should i add all of them or in proportion with the amount of salt used.
    Wat I used to do is to only add in the bottle solution after I used up a pack of salt.

    Just to share m experience.

    Cheers
    JC

  6. #46
    Join Date
    Jun 2005
    Posts
    159
    Feedback Score
    0
    Images
    2
    Country
    Singapore
    Quote Originally Posted by solonavi
    Gd luck, bro.

    Cheers
    JC
    Yeah...!!! it's out...!!! got the clam up to higher grounds...
    will take a pic to show you, say 2 weeks later, see whether got improve boh..
    but by the looks of it now, din seem to improve much though...

    Thanks for your advice JC!

  7. #47
    Join Date
    Jun 2005
    Posts
    159
    Feedback Score
    0
    Images
    2
    Country
    Singapore
    Quote Originally Posted by solonavi
    Try using all power effient equipment. Energy saving is one thing but the main point is it add less heat. A pump I luv is from Maxijet. Small, high flow and power efficient. Used it as wavemaker and to run my remorapro b4.

    Ya. but the water stay mainly in 27 degree. Top up daily is alot!


    JC
    Thanks for the idea of Maxijet.

    Even with 1 AC fan, everyday have to cheers with the tank twice, once in morning b4 work, once at night when come home...
    each time is 1 litre... kan pei...

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •