+ Reply to Thread
Results 1 to 8 of 8

Thread: DIY CO2 bubble counter and checkvalve

  1. #1
    Join Date
    Mar 2006
    Posts
    322
    Feedback Score
    0

    DIY CO2 bubble counter and checkvalve

    This is an excellant idea originally from APC posted by John N :
    http://www.aquaticplantcentral.com/f...s-recipes.html

    Adopted here with slight modification and using parts from local sources :

    (1) Get a 5ml syringe from Guardian Pharmacy (cost S$0.30) and a typical checkvalce from LFS (~$2) :



    (2) Use a pen knife to cut the rim off the syringe tube (do it with care) :



    (3) Fill the syringe tube with water to half the level, and plug in the check valve.



    (4) Connect the assembly. (CO2 bottle->this bubble-counter/check valve assembly -> diffuser (or reactor) at the tank.



    Compare this ~$2.3 gadget with a commercial bubble counter (~S$5) and a check valve (~$2) - total S$7.
    this is perfect for small size tank with DOY CO2 system !

    (Disclamer : have not tested with pressurized CO2 system yet.)

  2. #2
    BFG's Avatar
    BFG is offline Baton courtesy.....service with a smile!
    Join Date
    Feb 2002
    Posts
    2,789
    Feedback Score
    0
    What an eye-opener! I have 2 of these parts together and it didn't occur to me that together, they could be useful too. Thanks for the link and the pics of the diy parts. Hope more members could benefit from your experience. Thanks!
    If you've learnt, teach, if you have, give.
    Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.

  3. #3
    Join Date
    Dec 2001
    Location
    Woodlands
    Posts
    3,917
    Feedback Score
    0
    Looks like a good idea. Would be great if can be tested on pressurised CO2. I never thought the rubber tubing can fit the syringe.

    But some thoughts:
    - the check-valve will still function if wet? I had experience once or twice the check-valves which let water flow back when wet.
    - for DIY CO2, most folks have a 2nd bottle of water to filter the CO2 before passing on to the tank. See http://www.thekrib.com/Plants/CO2/co2-faiz.html for example. This 2nd bottle acts as a bubble counter too.
    koah fong
    Juggler's tanks

  4. #4
    Join Date
    Nov 2004
    Location
    Woodlands
    Posts
    1,065
    Feedback Score
    0
    Would say a very innovative idea, may be neater this way compare to bubble counter.

  5. #5
    Join Date
    Aug 2002
    Location
    Woodlands
    Posts
    1,213
    Feedback Score
    0
    it's really a neat idea! combining 2 into 1. It's really nice of you to show the detailed steps with pictures. Thumbs up for you!

  6. #6
    Join Date
    Mar 2006
    Posts
    322
    Feedback Score
    0
    Quote Originally Posted by juggler
    - the check-valve will still function if wet? I had experience once or twice the check-valves which let water flow back when wet.
    - for DIY CO2, most folks have a 2nd bottle of water to filter the CO2 before passing on to the tank. See http://www.thekrib.com/Plants/CO2/co2-faiz.html for example. This 2nd bottle acts as a bubble counter too.
    Really ? OK, I'll keep a watch.
    Encourage more to try it and share any observation.
    Thanks.

  7. #7
    Join Date
    Jul 2003
    Location
    singapore
    Posts
    12
    Feedback Score
    0
    simply impressive.
    think really need to crack the brain a bit.
    then all the good DIY ideas will come out.

    nice and neat.

  8. #8
    Join Date
    Dec 2005
    Location
    Bukit Batok
    Posts
    48
    Feedback Score
    0
    good idea.. it didn't occur to me .. i have both parts in my junk box , will give a a try.


    cheers

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts