Re: Where to repair CO2 regulator valve with solenoid

[williamng]

Doesnt seems to be able to work. Normally, if the power is off, there should not be any co2 release. I dun know what is the problem but my regulator valve is always in an open position, no matter whether the power is on or off. Anyone know where I can repair the regulator?

[David]

Hi william

this tends to happen when the regulator chamber pressure is too high.....due to the force within the chamber, it hampers the solonoid valve to shut properly. What is the pressure in your main cylinder?....if you are getting anything about 1000 it is too strong. what you can do now if you do not want to change your regulator, remove it and slower turn up your cylinder valve to 800 and try again.