This impeller belong to which pump?
It will be good for you to name it, may be someone got extra spare part to spare
This impeller belong to which pump?
It will be good for you to name it, may be someone got extra spare part to spare
********
Andrew
its for my skimmer, prizm pro
search for high and low for replacement
thanks
I guess those 2 mixture super glue is Epoxy. You need a day for it to cure before you can use.
MISSION ACCOMPLISHED!!! TIME TO LAY BACK AND RELAX!
A Journey Of A Thousand Miles Begins With A Single Step
i waited for a day before using it but it only lasted 3 days
Try this brand "Araldite" Epoxy.
MISSION ACCOMPLISHED!!! TIME TO LAY BACK AND RELAX!
A Journey Of A Thousand Miles Begins With A Single Step
Petmart sells replacement impellers, but the impellers aren't cheap..
my boss use a industrial standard glue(translucent white mix with translucent yellow) that claims to hold 2 tonnes of load
hope it can endure until the replacement arrive
thanks all
the problem with many of these glues and epoxies is the minimum contact surface size might be larger than the impeller face.
you're bonding metal to plastic right?
No need to use Araldite for these repairs. Normal cyanoacrylate super glue is fine. I fixed the faulty impeller in one of my Eden 316 with normal 3M super glue. It's still working 3 months after the repair. Just let it cure, rinse it in tap water good and it should be fine.
Fish.. Simply Irresistable
Back to Killies... slowly.
I'm back & keeping 'em fingers wet,
Ronnie Lee
Bookmarks