i bought the replica one from seaview yesterday, went home and plug it to my co2 + solenoid and waited for hours, very slight bubbles only.. heres a pic
today went back to seaview thinking that set was faulty.. but was told that the atomizer needed to be soaked in water for some time to purge the air out.. but still they exchanged a new one for me, so i came back, soaked the atomizer for more than 3 hours, and now, after 10mins, not a single bubble.. im running 7bps btw.. any idea why?
This is how the pack looks like
Hi Bros,
I have returned! But only in partial success.
I have sent all those who made orders a PM. Please check your mail. Thanks.
FYI, they didn't have enough UPS 16/22 diffusers for everyone. So Shadow gets his order, but Limz and I will have to take a chance on the 'Intense' version which looks about the same.
Will post back soon as I finish hooking it up! Hopefully with nice pics. Hopefully the Intense version works just as good.
Bro Evolutionz, I just uploaded to youtube with the link below but i only used 1bps of co2.
Last edited by soonhong; 31st Jan 2011 at 01:55. Reason: typo error
Thanks for the video upload soonhong, i shall try again tomorrow at 1bps..
Bro soonhong, so u set ur bps to 1.. Can u still see the stream of co2 mist coming out from ur outlet? At lst, when I set too fast the bps, I can see... But when I reduce to 1bps, I can't see the stream of co2 mist alrdy... Actually I wanted to see the mist... Tht y I go get tis inline diffuser
Bro Heavenkid, how is your inline co2 diffuser? I tried the inline co2 reactor connecting to 2217 and chiller, the flow greatly reduced.
inline diffuser should not reduce the flow, nothing obstuct the flow.
Hey guys,
First of all, a very big thank you to wolfgang246 for helping to purchase the GLA-lookalike atomizer from HK and posting to me.
Next, heres how the atomizer performed.
Yes, it worked just like the one TS posted, and upon closer looked, the words printed on the suction cups seems to look like the same as the GLA one as well as the one blue33 posted..
heres 2 FTS showing a normal cheap glass diffuser VS the new atomizer.
As im having high flowrate for my 422 tank, the co2 bubbles are being blown all over the tank.. from the pics below, you can see an obvious difference.
The atomizer, soooo much finer bubbles..
im uploading a video as well.
ANS is having it able to get one at the lfs in amk central at 6 or 7 bucks
Looking at the video posted by soonhong, seems like most of the bubbles are not so fine and coming out from the ends of the diffuser (weak spot?). The one by bro EvolutionZ from HK looks good though! Just my comments after looking at the videos/pictures!
Bookmarks