Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Page 3 of 3 FirstFirst 123
Results 41 to 60 of 60

Thread: Just another DIY ADA Cabinet build

  1. #41
    Join Date
    Sep 2011
    Posts
    157
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Hi bro,

    very inspiring project. Are we able to get pre laminated ply? Thinking of doing one for my up coming 3 footer. Dont wish to get the ready made as my co told mi not to rush getting it setup. So with a very long time frame, i might dwell into doing it myself. Have you got the blue prints of the cab?

  2. #42
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Thanks darter.

    The only 'pre laminated' ply comes in white; single or double side - it's what you find commonly used in cupboard shelves. The trouble with that apart from not being very nice looking is that you'd still have to laminate the edges after cutting/fixing it up; so you're better off laminating the entire box with your choice of colour/design!

    As for "blue prints" - I've listed in the very 1st post; it's in Russian, but you can easily figure it out.

    Look forward to seeing your build too!

  3. #43
    Join Date
    Mar 2009
    Posts
    1,639
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    did you use a pipe bender to bend the L shape ? what size stainless steel rod did you use ?

  4. #44
    Join Date
    Oct 2011
    Posts
    44
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Nice diy! Thank for sharing too.

  5. #45
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Quote Originally Posted by limz_777 View Post
    did you use a pipe bender to bend the L shape ? what size stainless steel rod did you use ?
    Hi bro - sorry for late reply; it is not possible to bend stainless steel pipes with a pipe bender (ie DIY style). They were done by the pipe vendor; I believe they are 25mms (ODs).

    Thanks for the encouragement Ark!

  6. #46
    Join Date
    Mar 2006
    Location
    Singapore, Singapore, Singapore
    Posts
    400
    Feedback Score
    2 (100%)
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Hi neverwalkalone,

    may i know what did u use to trim the laminate? a router?

  7. #47
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    @planted86 - the laminating process was shared in post #6 here. Basically, I used the Plastic cutter and then filed/sanded it down.

    It's quite easy to do once you get the hang of it, but nevertheless I'm sure you'll get a better finish if you have the right (power) tools like routers etc as seen in so many DIY videos online.

  8. #48
    Join Date
    Aug 2011
    Location
    Lorong Chuan
    Posts
    64
    Feedback Score
    0
    Images
    4
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Just out of curiousity, how much did it cost to have the light stand produced by the pipe vendor and which vendor did you approach to fabricate the metal stand?

  9. #49
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Quote Originally Posted by daniel19831123 View Post
    Just out of curiousity, how much did it cost to have the light stand produced by the pipe vendor and which vendor did you approach to fabricate the metal stand?
    Sent you a PM.

  10. #50
    Join Date
    Aug 2011
    Posts
    53
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    can pm me as well? thanks.

  11. #51
    Join Date
    May 2009
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Hi can pm me where you get the light stand please.
    THank you.

  12. #52
    Join Date
    Jun 2014
    Posts
    273
    Feedback Score
    0
    Country
    Singapore

    Just another DIY ADA Cabinet build

    Very nice!

  13. #53
    Join Date
    Jun 2012
    Posts
    344
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Swee.
    would like to see the back. Did holes or slots for the pipes. No vents for chillers?
    Can I read your LED diy guide?

  14. #54
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Quote Originally Posted by mercur1al
    Very nice!


    Thank you!


    Quote Originally Posted by Bieffe View Post
    Swee.
    would like to see the back. Did holes or slots for the pipes. No vents for chillers?
    Can I read your LED diy guide?
    Thank you. Pardon the delay in replying, I havent been on the forum as much as I used to.

    The photos of the back are in post #6. Repeated here:
    IMG_0237.JPG

    I don't use chillers (I don't have 24hr aircon, so I don't think my fishes/plants should have it too! ). Basically, 4 holes at the back, and 2 on the sides. The power cables and CO2 tube (used to) are via the back, the in/out water pipes are via the sides.

    The LED build thread is here: http://www.aquaticquotient.com/forum...-for-3-ft-tank. There's been significant progress on LED light builds since then, I'm sure you can do better at a lower cost too!

  15. #55
    Join Date
    Jun 2012
    Posts
    344
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Oh boy I missed that. Didn't use chiller until the plants keep dying. Your level of carpentry is commercial grade. Not to mention the tools u need to have to get such beautiful cuts and holes. Your work table is also great. If only I have luxury to such stuffs and space. What I did is I took an Ikea unit and mod...so to pass inspection by my CFO! Hahah. Hole saw also biggest is 63mm that size a 13amp cannot go through....so have to dismantle plugs.

  16. #56
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Quote Originally Posted by Bieffe View Post
    Oh boy I missed that. Didn't use chiller until the plants keep dying. Your level of carpentry is commercial grade. Not to mention the tools u need to have to get such beautiful cuts and holes. Your work table is also great. If only I have luxury to such stuffs and space. What I did is I took an Ikea unit and mod...so to pass inspection by my CFO! Hahah. Hole saw also biggest is 63mm that size a 13amp cannot go through....so have to dismantle plugs.
    You're too kind bro. The build 'looks good from FAR, but at near view is far from good!' hahaha

    I don't have that many good tools really. Just a drill and a jig saw. Had to go to a carpenter to get the hinge recess (circular hole for the door hinges) drill with their tools. Pretty ex for a simple 5min job. No choice. I would have invested in a paddle/wood bit if I'd known the guy charged so much!

    the 13amp power plug should be able to squeeze through the hole made with the 63mm hole saw.

    Be careful with IKEA products, most of them are made from particle board, and it may not be very strong but more importantly, it gets damaged easily by water!! IKEA also sells solid wood (their 'as is' corner) but you'll have to cut them to your needs, so you're back to square 1 (their solid wood 'discards' are good value, but SUPER HARD to cut!)

    Ya - most important is that the "CO" approves! You're a wise man.

  17. #57
    Join Date
    Jun 2012
    Posts
    344
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Happy wife happy life. Ya took the ikea and reinforce here and there. Ya once u get water it will bubble! I once paid a shop to cut plywood $2 per cut! Gone in 30 sec!

  18. #58
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Quote Originally Posted by Bieffe View Post
    Happy wife happy life. Ya took the ikea and reinforce here and there. Ya once u get water it will bubble! I once paid a shop to cut plywood $2 per cut! Gone in 30 sec!
    A happy wife is a happy household. (heh heh).

    Do share you build so we can all learn and appreciate!

  19. #59
    Join Date
    Jul 2015
    Posts
    36
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Hi bro, for the 2footer, do you still add kapur wood for support?

  20. #60
    Join Date
    Dec 2008
    Posts
    205
    Feedback Score
    0
    Country
    Singapore

    Re: Just another DIY ADA Cabinet build

    Hi, the 2fter doesn't have additional supports; the plywood is strong enough to support it without issues.

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •