Reply With Quote
I think some shrimp keeper using stainless steel pipe.
Metals are used due to being more conductive. Using plastic will lower the effectiveness.
Diy chiller
Hi All...
After reading & thinking of hot to lower the temp in tank.
Finally find this post quite good, but i had read that copper will harm shrimp; perhaps can change the copper to plastic tubing.
I had never try this so far... thinking of give it a try, i need more time for planning....
Anyone had try do share please...
See below links :-
Regards,
http://rebootdaily.blogspot.sg/2007/...t-chiller.html
I think some shrimp keeper using stainless steel pipe.
Metals are used due to being more conductive. Using plastic will lower the effectiveness.
Learning the hardway, not the highway.
Photo Blog - impervious-endeavors.blogspot.com
Semi-Active currently
"if he cant be bothered to take the time to write his question properly, why should I take the time to answer him."
Stainless steel or titanium
I see... thanks for the info...
now thinking of ICE probe... anyone using, how is the performance for 2 feet tank....?
Where can i buy this in Singapore... i only found on amazon selling around $110...
Thanks....
Not good for 2ft. You need multiple units to run nearly constantly
Marine stainless steel...Originally Posted by madscientist
Sent from my iPhone using Tapatalk
Hi, has any one try the CPU cooler directly to the tank before?
Can post some picture or step to do it....(Cant' afford chiller)...
Thanks....
Baton courtesy.....service with a smile!
CPU cooler usage is from a high temperature environment to room temperature. Different type of equipment for different scenario.
If you've learnt, teach, if you have, give.
Don't walk behind me as I might not lead, don't walk in front of me as I might not follow. Walk beside me, as my friend.
Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.
You can search for 2nd hand hailea or resun, probably only $100 which about the same if you DIY
Yes i know, but in long run how the PUB bills' huh... just wonder...
Still new and thinking a lot of consideration....
For 3ft tank, set to 25c cost about $10 a months. I'm using equipment to measure the montly power usage, not estimate.
Is it normal to set to 25 or set to 21?
Depend on your purpose i guess, my tank is planted tank, so 25-27 is good. Last time i set to 26 and cost me about $8 a month, not much different. But again it depend on the weather.
You using kill a watt?
Yes, you can get similar device from diy shop
Lenkohe don't mind I ask some question too ,For 3ft tank, set to 25c cost about $10 a months. I'm using equipment to measure the montly power usage, not estimate
Hi shadow don't mind if I ask you what brand chiller you using for your 3ft as I am totally new
In chiller wish to get one must scared the pub bill cost me a bomb like lenkohe but finally I got the actual answer as I want to set the temperature for my 3ft tank to 26c . So may I know what brand and reuqire chiller suitable for 3ft ? Thanks
What's the cost of the device?
I'm using artica 1/10 hp, cant remember the model.
As for kill of watt cost me around $40-$50.
Thanks shadow, I think I better start a new thread was looking at resun and healia brand but not sure which is better.
Shadow may I know where you bouggt the kil a watt I just went to home fix diy shop they say they don't have this product
Bookmarks