DIY-ing a 4 pin PL light set

[Peterfoo]

Hi,

Does anyone here have diagrams of a DIY 4 pin PL light set?
Have a spare 3ft FL cover. to Save cost.
What are the eqpts required.

Thanks

[juggler]

Hi, if using eBallast, this thread can help:
http://www.aquaticquotient.com/forum...read.php?t=392

If using magnetic ballast, need to make slight adjustment to include the starter. But for your 3ft cover, a 2x36W eBallast should be just nice with 2 pcs of 36W PL tube. Hope space allows for the eBallast. Good luck.

[Peterfoo]

Hi, if using eBallast, this thread can help:
http://www.aquaticquotient.com/forum...read.php?t=392

If using magnetic ballast, need to make slight adjustment to include the starter. But for your 3ft cover, a 2x36W eBallast should be just nice with 2 pcs of 36W PL tube. Hope space allows for the eBallast. Good luck.

Thank very much, i should be heading NA soon to start up.

[juggler]

Thank very much, i should be heading NA soon to start up.

Great - Mr Chan has all the DIY kit (tubes, C-clips, e-Ballast, wires etc) you will need. Always good to call first to check availability.