Creating Carpet Moss

[dnsfpl]

http://www.aquamoss.net/How%20to%20c...oss%20wall.htm

anyone knows where to buy "Plastic Mesh"? roughly how much for 3 by 1 feet?
must i use any special "Tying Wire" or normal sewing thread will do?

planning to rescape my moss if not change to us fissiden

[geezer333]

You can get it in those hardware shop (Gao Kim Dim) I just bought one 2m by 0.5 m for $18. Actually I dont need so much if you interested you can share with me the cost. I stay in Jurong West . Cheers

[dnsfpl]

You can get it in those hardware shop (Gao Kim Dim) I just bought one 2m by 0.5 m for $18. Actually I dont need so much if you interested you can share with me the cost. I stay in Jurong West . Cheers

will it sink?

[geezer333]

not sure bro I will check and let u know later

[torque6]

I am currently using the plastics ones and they dont float. Bought mine from c328 at 1m for about $6, comes in black/green colors. However, i usually fold mine instead of using fishing line to secure them. The aluminium ones sold at NA are pretty good, but they only come in small sizes. Besides, aluminium wire mesh tends to "accidentally" scratch my glass walls.

[geezer333]

Ya agree with torque6 as i have just tied 1 piece abt the size of 10cm by 6cm. It don't really float by if u put it near the outlet of the filter it will drift along with the current

[dnsfpl]

I am currently using the plastics ones and they dont float. Bought mine from c328 at 1m for about $6, comes in black/green colors. However, i usually fold mine instead of using fishing line to secure them. The aluminium ones sold at NA are pretty good, but they only come in small sizes. Besides, aluminium wire mesh tends to "accidentally" scratch my glass walls.

will go c328 to take a look
from auntie or polyart?

thanks

[geezer333]

Arrrg i am not sure I got my from hardware shop , I believe both should carry. Cheers

[dnsfpl]

Arrrg i am not sure I got my from hardware shop , I believe both should carry. Cheers

yours fully sink like ss mesh?

[geezer333]

Ya but it does drift like what I said as it is too light, you just need to put 3 to 4 grain of sand to stop it drifting or put a stone at the corner of the mesh Cheers

[torque6]

Bought mine from Mrs toh, with the weight of the mesh + moss attached, it should sink. If you dont want to risk it, just get the aluminium ones.