Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 6 of 6

Thread: T-joint to split 16/22mm tubing

  1. #1
    Join Date
    Oct 2008
    Posts
    196
    Feedback Score
    0
    Country
    Singapore

    T-joint to split 16/22mm tubing

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Do LFS sell a "T-joint" that enables me to split a 16/22m tubing into 2 ways....? Please advise which shop sells it?

    Thanks!

  2. #2
    Join Date
    Aug 2011
    Location
    nearby Wululand..a nice place northern part of Singkapoh..
    Posts
    1,200
    Feedback Score
    8 (100%)
    Images
    1
    Country
    Singapore

    Re: T-joint to split 16/22mm tubing

    i remember seeing "Y or T joints"of different sizes in Aquastar yishun and Y618...

    Not sure about sizes as i saw various size displayed... maybe you can try your luck there if you passed by...


    Check out my Blog on planted tank, good for newbies ( i am lazy to retype all the info i know, so please click and read below link... i hope you don't fall asleep while reading)
    Link to my Blog

    I am not PERFECT but I am LIMITED EDITION !!! BIG Tank comes with BIG Responsibility...as they makan a lot of $$....lol

  3. #3
    Join Date
    Dec 2001
    Location
    Balestier
    Posts
    2,769
    Feedback Score
    0
    Country
    Singapore

    Re: T-joint to split 16/22mm tubing

    NA, C328, EOA, Petmart are some who sells them.
    [email protected]
    ----------------------------------------------------------
    The title below my name does not make me a guru...listen at your own risk!...

  4. #4
    Join Date
    Aug 2013
    Posts
    48
    Feedback Score
    1 (100%)
    Images
    2
    Country
    Singapore

    Re: T-joint to split 16/22mm tubing

    Most shops have.. Y618 selling $2.00 each. If you look for Eheim then it is $7.50 :-) haha

  5. #5
    Join Date
    Dec 2001
    Location
    Balestier
    Posts
    2,769
    Feedback Score
    0
    Country
    Singapore

    Re: T-joint to split 16/22mm tubing

    Are you trying to split either inlet and or outlet. If you are, try getting a 'Y' joint rather than a 'T' joint....reason being, taking hosing length are equal, The pressure divided by a 'Y' joint is more equal as oppose to a 'T' joint. the straight through section of the T gets more pressure than the adjacent.
    [email protected]
    ----------------------------------------------------------
    The title below my name does not make me a guru...listen at your own risk!...

  6. #6
    Join Date
    Oct 2008
    Posts
    196
    Feedback Score
    0
    Country
    Singapore

    Re: T-joint to split 16/22mm tubing

    Thanks for the very helpful information. Will look for Y instead of T joint!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •