Reply With QuoteYours is 40PSI. According to their manual, yes yours should be able to operate it. I could operate it even with 30+ PSI.
Anyone knows if my given regulator pressure could operate the UP AQUA Atomizer?
Uploaded with ImageShack.us
Yours is 40PSI. According to their manual, yes yours should be able to operate it. I could operate it even with 30+ PSI.
Holy is the Lord, God Almighty ! The Earth is filled with His Glory !
90 x 50 x 50 cm tank: Eheim 2217; ANS CO2 Solenoid with 60mm intense bazooka; Zetlight 6400; Teco 500 Chiller; Borneo Wild Steel inlet/outlet
Ferts: Dry Mixture/Dr Mallicks. Temp: 26 degrees Substrate: ADA Amazonia
$T2eC16h,!ykE9s7tyfbGBRg40WW+mg~~60_35.JPG
This is the atomizer right?
I used the one below. However after a day, it was actually leaking.
1000716_180.jpg
yes, the first pic is aqua atomizer.
You need to have 30 psi and above for it to work properly.
The 2nd pic is the new version available at East Ocean. I find the one in the 1st pic (old version) more reliable.
Yours is the new up aqua super atomizer. It has parts that can be opened up so that you are able to clean it. These openings do have rubber gaskets and o-rings to prevent water leakage. Maybe you would like to check that you have tightened it sufficiently, or that the o-rings are sitting in place properly.Originally Posted by raynoryeo
Sent from my GT-N7105 using Tapatalk
Posting Permissions
Bookmarks