Customised Fish Tank Stand

[whoami]

Hi,

Anyone know where can I get customised fish tank stand. My fish tank is about 3.5 ft in length.

Thanks.

[cheesehazard]

You could build yourself one. Its very simple. I built mine for my 55 gallon tank. Its 4 feet long. I built it for under 50 dollars. It looks pretty good. I also built my hood for 80 dollars with 200 watts.

[geoffrey]

Hey, you DIYed most of equipment!! Filter too. Could I have a peep at your filter?

[cheesehazard]

Since these pictures I have changed it around a little. I added a tee connector and a ball valve on it to bleed air out. I swapped the canisters around so the clear is on the left side. I also made a new c02 reactor. The c02 reactor is almost three feet tall. I am going to take some new pictures as soon as i get some batterys for my camera.

[whoami]

Hi,

Can you describe how you do it ? Where do you get the material to build the stand ? thanks.

whoami

[geoffrey]

Thanks for sharing. It's very impressive.

[cheesehazard]

Basicly I just made a frame. It has 6 legs that are made from 2*4s. The entire frame is 2*4s. The outside i covered with plywood and painted. You can make the stand anyway you want. There are a bunch of DIY sites that show you how to make a stand. Just find some instructions online and modify it to fit your tank.