Any colormetric test can use a spectrophotometer.
So you mix some reagents in the test blank, plop this into the spect and read out the concentration.
You make some known standard solutions say 0.5, 1-2-5-10-20-30ppm etc and make a wavelength vs Absorbance graph.
From there you can plot very accurately the levels in your tank.
They do make NO3 probes and also PO4 probes, these run 300-400$ or more each and can be used on mosy ion based meters for digital real time out put.
Both fairly pricy options.
Regards,
Tom Barr







Reply With Quote




Bookmarks