Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Page 1 of 4 1234 LastLast
Results 1 to 20 of 62

Thread: Starting New Planted Tank - 1st thread!

  1. #1
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Starting New Planted Tank - 1st thread!

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    more than 10yrs ago, my tank got plants but not those carpet type. Wanted to start doing those moss carpet type of tank.

    Equipment :
    tank - 2ft
    filter - still considering between a OHF or a Cannister or both. And is UGF dead now? LOL
    Light - See wat the LFS suggest/recommend
    Sub - Seachem/ADA? Which of their range? Seachem itself got wat flourite, onyx..... very cheem, last time i use normal gravel nia.
    CO2 - Not going to use CO2
    Fert - Seachem flourish?

    Fish - probably 1 male betta to cycle and then add either neon/blue tetra/WhitecloudMountMinnow/any similar good companions?

    I intend to do the DSM. But one of my fren did it before and his moss rot :S. What do i ahve to look out for?

    Thanks for all the expert comments n suggestions

    And akemashite omedetou gozaimasu!

  2. #2
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Quote Originally Posted by Maru View Post
    tank - 2ft
    Thats a good tank size to start up with.

    Quote Originally Posted by Maru View Post
    filter - still considering between a OHF or a Cannister or both. And is UGF dead now? LOL
    OHF can work but it covers the top and obstructs the view, along with the additional visible pump unit in the tank... canister filter would be better as it can be hidden away under the tank and you can use nice glass lily pipes with the open top.

    UGF isn't so suitable for planted tanks as it breaks down soil substrates faster and the roots of the plants eventually get tangled into the UGF and clog them up.

    Quote Originally Posted by Maru View Post
    Light - See wat the LFS suggest/recommend
    Most LFS would tend to either recommend you expensive overkill lights or cheapo underpowered lights... or light brands which no one wants and they are trying to get rid off.

    It'll be best for you to research and check other people's tank journals and see what actual light brands/models they use successfully to grow their plants in similar planted tank setups, save the hassle of buying the wrong type of lights.

    Quote Originally Posted by Maru View Post
    Sub - Seachem/ADA? Which of their range? Seachem itself got wat flourite, onyx..... very cheem, last time i use normal gravel nia.
    For planted tanks, best to use ADA Amazonia aquasoil, it has very high nutrient content and has been tried and tested by lots aquascapers for growing plants.

    Quote Originally Posted by Maru View Post
    CO2 - Not going to use CO2
    That would be a low-tech non-Co2 injection approach. Just have to take into consideration that plant growth will naturally be at a slower pace, so the lights and nutrients should also be moderated accordingly.

    In such setups, dosing liquid carbon supplements like Seachem Excel can help improve the plant growth rate.

    Quote Originally Posted by Maru View Post
    Fert - Seachem flourish?
    If you are using ADA Amazonia aquasoil, it will supply the bulk of nutrients for the first few months... all-in-one fertilizers like Seachem Flourish would be suitable for the initial plant grow-out period to supply trace/micro nutrients (especially if you have fast growing plants in the tank). You can dose more macro nutrients later when the soil's nutrient content gets depleted.

    Quote Originally Posted by Maru View Post
    Fish - probably 1 male betta to cycle and then add either neon/blue tetra/WhitecloudMountMinnow/any similar good companions?
    If you use nutrient-rich soil substrate like ADA Amazonia aquasoil, it will release alot of ammonia and nutrients initially to grow the plants, so that will already kickstart and support the cycling process... don't add any fishes until the cycle is complete.

    Quote Originally Posted by Maru View Post
    I intend to do the DSM. But one of my fren did it before and his moss rot :S. What do i ahve to look out for?
    Different plants react to DSM in different ways and have different requirements... for moss, you have to mist them regularly, seal the tank and keep the humidity high, or else the moss will dry out very quickly and rot away.
    :: Urban Aquaria ::
    www.urbanaquaria.com

  3. #3
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Wow Thanks UA!

    And Happy new year to u and all in AQ lol!

  4. #4
    Join Date
    Mar 2009
    Posts
    1,639
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    UGF is a flop in aquarium filtration i think , unless you have a drainage to a sump below the UGf

  5. #5
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    I bought my T8 lights single tube (changed the tube to 20w tropical - for plant growth), ADA aqua soil, antichlorine and seachem excel today from 618.

    bought some xmas moss too.

    QUestion : the moss come in one lump in one pack (of water). So do i take the lump and separate into smaller section to put on my substrate or i need to find the root or something. I placed some just over the substrate (very hydrated) and tied some over a mesh and placed over the substrate. Which one is correct/better?

    Later go buy some plastic cover to cover the tank and a water spray bottle.

    DSC_0116.JPG

    I bought the following but forgot i doing DSM..... can the leaves be not immersed in water to grow?

    DSC_0117.JPG
    Last edited by Maru; 2nd Jan 2015 at 16:12.

  6. #6
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    BTW, in Tom Barr's DSM thread, whats the plant that u used?

  7. #7
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Quote Originally Posted by Maru View Post
    QUestion : the moss come in one lump in one pack (of water). So do i take the lump and separate into smaller section to put on my substrate or i need to find the root or something. I placed some just over the substrate (very hydrated) and tied some over a mesh and placed over the substrate. Which one is correct/better?
    Its best to tie the moss to objects like porous/rough rocks, wood or stainless steel mesh, their rhizoids will eventually grow into the objects, attach securely and will be weighed down.

    If you simply put the moss onto the soil substrate, their rhizoids will just grip onto individual soil grains so it ends up only attaching to the top-most thin loose layer of the soil (they don't grow long roots that reach deep into soil like other plants), so the result is they'll tend to be easily detached and shift around or float up when the moss grows more dense.


    Quote Originally Posted by Maru View Post
    I bought the following but forgot i doing DSM..... can the leaves be not immersed in water to grow?

    DSC_0117.JPG
    That looks like blyxa japonica... can't really see clearly though, so abit difficult to confirm. But if it is indeed blyxa japonica, then thats a fully aquatic plant and it can't be grown emersed.


    Quote Originally Posted by Maru View Post
    BTW, in Tom Barr's DSM thread, whats the plant that u used?
    If you are referring to these threads by Tom Barr:

    http://www.barrreport.com/showthread...nted-Aquariums

    http://www.aquaticquotient.com/forum...w-planted-tank (this one has photos)

    The plant he uses for DSM is Hemianthus callichtroides (aka HC).
    :: Urban Aquaria ::
    www.urbanaquaria.com

  8. #8
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Thanks UA! If the one in Tom Barr thread is HC, then can forget it liao - heard that HC is not for beginners like me LOL.

    Ah I try to tie the loose ones onto a mesh. What i did was just put it over a mesh and use thread to tie it down, but i saw some youtube vids that put the moss between a bended or 2 mesh. Is that better??

  9. #9
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Quote Originally Posted by Maru View Post
    Ah I try to tie the loose ones onto a mesh. What i did was just put it over a mesh and use thread to tie it down, but i saw some youtube vids that put the moss between a bended or 2 mesh. Is that better??
    Both methods will work... though most people simply tie the moss onto a single layer of stainless steel mesh with fishing thread, as long as the moss is secured in place and doesn't float around, its fine.

    Its not really necessary to use 2 layers of mesh and sandwich them together, that just uses up more mesh.
    :: Urban Aquaria ::
    www.urbanaquaria.com

  10. #10
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Arrigato gozaimashita UA

  11. #11
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    In around just two weeks, my 2 lumps of xmoss tied to mesh using DSM method started to grow (the lumps got thicker and some shoot sideways out of the mesh) Think this weekend will go get the filter and dw, and possible some stem plants to flood in.

    I let it cycle abit more before adding livestock.

    Cannister filter - Atman/dolphin/any around the same price range?

    Livestock - 1 betta plus 10 WCMM and 1zebra otto (for maintenance as rec by UA). Possible to add CRS ? And what sequence shld i add the fishes/prawns? Read somewhere that for the fishes, the peaceful fishes shld go in first then followed by the betta (in case the betta think the other fishes added is his food LOL).

  12. #12
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Do make sure the tank is fully cycled before adding in livestock, as in ammonia and nitrite are 0 and only nitrates showing some readings, and the parameters have to stay consistent and stable.

    Canister filter brand and model will depend on your budget, if possible get Eheim, but you can also look at the other cheaper brands like Atman, Dophin, Shiruba, Jebao, Azoo etc (their prices are mostly similar). Consider scouting the forum marketplace for good deals on 2nd hand canister filters too.

    As for livestock, your selection looks okay for the tank volume... just that if you were to get CRS, they tend to fare better in cooler water conditions, so unless you are going to use a chiller (or fan system), with the tank currently being next to the window and getting sunlight exposure (along with the additional heat from your T8 lights) will naturally result in increased water temperature, which is alot less optimal for those type of shrimps.

    You could consider more hardy adaptable shrimps like RCS instead, they can tolerate a wider range of water conditions and parameters (compared to CRS).

    Sequence of adding livestock is usually shrimps first (so that they can settle in and find hiding places first), though that also means your tank has to be fully cycled and ready for them, otherwise there will be mass deaths and you'll have to spend more money unnecessarily having to keep buying more to top up the shrimp population (especially for CRS which are more expensive)... then followed by algae eaters like otos, they don't disturb the shrimps so still allow them more time to adapt (though if you want to add zebra otos, also have to be careful as they are wild caught and much more expensive than normal otos and usually need more care to acclimatize them to a tank initially). The school of small fishes can be added sometime after that and then the last to be added would be the betta.

    Do note that there will be a 50/50 chance the betta will start hunting and eating the shrimps, or it may also turn out to be friendly and not disturb them... the only way to know is to introduce it into the tank and monitor closely. Just be prepared to remove the betta if it starts to cause trouble and pick fights in the tank.
    Last edited by Urban Aquaria; 20th Jan 2015 at 16:07.
    :: Urban Aquaria ::
    www.urbanaquaria.com

  13. #13
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Quote Originally Posted by Urban Aquaria View Post
    Do make sure the tank is fully cycled before adding in livestock, as in ammonia and nitrite are 0 and only nitrates showing some readings, and the parameters have to stay consistent and stable.

    Canister filter brand and model will depend on your budget, if possible get Eheim, but you can also look at the other cheaper brands like Atman, Dophin, Shiruba, Jebao, Azoo etc (their prices are mostly similar). Consider scouting the forum marketplace for good deals on 2nd hand canister filters too.

    As for livestock, your selection looks okay for the tank volume... just that if you were to get CRS, they tend to fare better in cooler water conditions, so unless you are going to use a chiller (or fan system), with the tank currently being next to the window and getting sunlight exposure (along with the additional heat from your T8 lights) will naturally result in increased water temperature, which is alot less optimal for those type of shrimps.

    You could consider more hardy adaptable shrimps like RCS instead, they can tolerate a wider range of water conditions and parameters (compared to CRS).

    Sequence of adding livestock is usually shrimps first (so that they can settle in and find hiding places first), though that also means your tank has to be fully cycled and ready for them, otherwise there will be mass deaths and you'll have to spend more money unnecessarily having to keep buying more to top up the shrimp population (especially for CRS which are more expensive)... then followed by algae eaters like otos, they don't disturb the shrimps so still allow them more time to adapt (though if you want to add zebra otos, also have to be careful as they are wild caught and much more expensive than normal otos and usually need more care to acclimatize them to a tank initially). The school of small fishes can be added sometime after that and then the last to be added would be the betta.

    Do note that there will be a 50/50 chance the betta will start hunting and eating the shrimps, or it may also turn out to be friendly and not disturb them... the only way to know is to introduce it into the tank and monitor closely. Just be prepared to remove the betta if it starts to cause trouble and pick fights in the tank.
    Ya, frens also swear with eheim. His one was still running now after 7yrs with no prob. But too exp for those with priming (think its the pro-series). Every day i looking at the marketplace for good deals :P

    Nah, the tank at the window temporary only. Gg to get a cabinet/stand (still cant decide) which will be away frm the window.

    Noted for your great advice on CRS :P

    Will take on ur sequence of adding livestock. But if the betta turn out to be aggressive, i wont top up the shrimps LOL. The betta is the priority. hahahahha


    Edit : ouch, just figured i got the acronyms wrongly. ya, i looking at cherry red shrimp (or isit known as red cherry shrimp) LOL. Not the crystal red. sorry.... i noob.... frankly i cant even differentiate the prawns i eat hahhahhahaa

  14. #14
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Topped up water last nite to cover the moss but the water all become black (due to the ada amazonia)...... My current thickness of soil is around 1.8cm. Isit enuf ? And my pack of amazonia basically still have like 80-90% left.

  15. #15
    Join Date
    Jul 2008
    Posts
    112
    Feedback Score
    0
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    1.8cm is too thin if you wish to grow plants especially. I am keeping a 3 feet tank with 7-8cm thickness of soil.

  16. #16
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    5cm like very tall though given my tank size and height hmmmm.

  17. #17
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    For your tank height (ie. 30cm tall?), you can try a 3cm soil height in front (sufficient for short carpet plants which have shallow roots) and then gradually slope it to 7-8cm soil height at the back (for larger background plants with deeper root systems). That will keep the tank looking "in scale" from the front and enhance the overall depth perspective.
    :: Urban Aquaria ::
    www.urbanaquaria.com

  18. #18
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    3cm should be ok for my tank height of 30cm (dun wan to lose the "space") LOL. I maybe slope it up to like 5/6cm although i dun have any large deep root plants in mind atm.

  19. #19
    Join Date
    Dec 2014
    Location
    Yishun
    Posts
    182
    Feedback Score
    1 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    I trying to flood my tank to introduce a canister filter. But as much as i try, the water get very dark/cloudy (cos of the Amazonia soil?) - i pump the water in over a piece of cardboard to minimise soil agitation. I am afraid that this will affect the light my moss will get - killing them. Shld i continue to add water in and use the filter? Will it clear up the water?

  20. #20
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Starting New Planted Tank - 1st thread!

    Quote Originally Posted by Maru View Post
    I trying to flood my tank to introduce a canister filter. But as much as i try, the water get very dark/cloudy (cos of the Amazonia soil?) - i pump the water in over a piece of cardboard to minimise soil agitation. I am afraid that this will affect the light my moss will get - killing them. Shld i continue to add water in and use the filter? Will it clear up the water?
    For ADA Amazonia aquasoil, the best method i've found to flood it is to use a spray bottle to wet the soil first, add the plants, then fill it very slowly using a strainer basket or airline hose siphoning water from a bucket. The main objective is to avoid the water flow moving any of the soil, even abit of soil agitation will already cause cloudiness.

    You can see how i did it in my past tank journal, water totally clear from the start: http://www.aquaticquotient.com/forum...607#post743607

    Anyways, if you have already filled the tank and its cloudy, just run your filter for a day and it should clear up the suspended particles and dust, you'll usually see the difference within just a few hours. The white fine filter wool in the canister filter will probably be brown due to trapping all the soil dust so you may need to change it out sooner to avoid clogging issues.

    Additional large water changes will also help to physically remove the cloudy water and replace it with clear water.
    :: Urban Aquaria ::
    www.urbanaquaria.com

Page 1 of 4 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •