Reply With QuoteCan't help with custom bending. But just a suggestion; you might have more luck getting a custom made acrylic stand.
~ Sent from Nexus 5 via Tapatalk ~
Hi anyone knows of any place where they can custom bend metal rods? I want to prop my lighting higher. Unfortunately I cannot have a hanging one.
Resistance is futile, you will be administrated!
Can't help with custom bending. But just a suggestion; you might have more luck getting a custom made acrylic stand.
~ Sent from Nexus 5 via Tapatalk ~
Vincent - AQ is for everyone, but not for 'u' and 'mi'.
Why use punctuation? See what a difference it makes:A woman, without her man, is nothing.
A woman: without her, man is nothing.
Why not get the acrylic stand from green chapter?
If you want to keep it simple, you can get aluminum rods of that diameter from Art Friend (there is one at Clementi). I think it should be about $4-$6 per meter.
Aluminum is soft enough to bend it yourself for a slightly higher stand.
you can diy with ~2mm thick stainless steel wire (can get from hardware shop) and bend it using plier into a holder shape. But make sure it can support the weight of your light.
below is my prototype for light elevator
stands_10cm_IMAG4495_zps69424dbd.jpg
I might be able to help you with a small token , the photo below is my beamworks light with custom made stand which I made myself.
Attachment 46130
If you interested, pm me.
Happy new year
Which type of wire do you use to do the stand. Dont think aluminum wire can take the load of the lightOriginally Posted by seudzar
"L" plate gardener
I am using 2.6mm thick stainless steel wire.
Some clearer view for the stand. Attachment 46168
Sorry for the late reply. I bought some metal rods from hardware shop but then realized my lightning legs cannot be removed. Can only extend, unless I take apart the lightest.
Ended up up I custom made an acrylic set at Dama in ubi for around $40. Laser cut and glued.
Just collected my custom made stand. Nice workmanship. Tank is around 3 weeks old
Last edited by Zeonic; 9th Jan 2015 at 14:17.
How much and where did you make those light stand Zeonic ? Can Recommend Thanks
Dama at ubi. $40. Bring your own sketch and measurement.
Price depend on your design and material.
Thank you Zeonic
One PC $40? Means one set $80
.:___________________________________________:.
The saddest thing in life is, it cannot be redo.
The Happiest thing in life is, it did not have to be redo.
Just custom a few sets from taobao.
keeping my fingers crossed it can be used when it arrives
Standard size for general light set? Keep me posted if you selling.
Ct
81235000
.:___________________________________________:.
The saddest thing in life is, it cannot be redo.
The Happiest thing in life is, it did not have to be redo.
Posting Permissions
Bookmarks