I'm using OF co2 solenoid and some problem with the bubble counter possible to get a replacement?
I'm using OF co2 solenoid and some problem with the bubble counter possible to get a replacement?
Is it this type of bubble counter?
If so, then the top cap is probably just screwed on abit too tight, you'll have to carefully unscrew it (don't break the glass or plastic)... maybe try wrapping a rubber band around the cap to increase friction, might help in opening it.
So can I still supply co2 to tank with water in the bubble counter?for today then tomorrow get it change
With water? Yes, it can be used with water in the bubble counter.
Unless you mean without water, then probably also can (or just remove the bubble counter and connect the Co2 hose directly to the needle valve)... but just that you wouldn't see any bubbles and there'll be no visible indication of the injection rate, have to be careful if there are livestock in the tank, as you could be injecting very high amounts of Co2 without knowing it.
But I connected to the glass counter without water,but I think somehow leak as the head got cold condense.
Hi bro u show me the pic but mine is come with the solenoid so can be replace?
I guess its not a good idea to use it without water then. Just have to not use the system until its fixed.
Should be replaceable, by right you should actually be able to unscrew the bubble counter from the needle valve, they are all supposed to be separate parts.
Bookmarks