Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 11 of 11

Thread: Betta tank set-up

  1. #1
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Betta tank set-up

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Thanks to the advise from masters on AQ I have finally set up my tank base on the advises .

    Went around sg to get the stuff need

    ImageUploadedByTapatalk1421756758.026406.jpg

    ImageUploadedByTapatalk1421757102.952453.jpg
    Tank:
    2nd hand 18cm X 15cm tank $8

    Substrate:
    Sudo reef sand from c328 $4.50 (y618 selling $4)
    Black pebbles for nana y618 $4

    Flora:
    Anubis nana "petite"
    Mini nana bigger 1 from pasir ris farmway $8
    Smaller 1 from c328 $7

    Fauna :
    Black betta junior

    Light:
    Aquazonic clip-on LED

    Preparing the plant "idea from master urban aquaria"
    ImageUploadedByTapatalk1421757178.725286.jpg
    First to cut and snip the nana into smaller batches
    ImageUploadedByTapatalk1421757254.113533.jpg

    After that rinse the pebbles and find the smallest
    ImageUploadedByTapatalk1421757301.252526.jpg




    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Gluing the pebbles to the nana instead of tying to DW or rocks
    ImageUploadedByTapatalk1421757482.317665.jpg

    Soak the plants in water overnight to quarantine

    ImageUploadedByTapatalk1421757521.819644.jpg

    Filling the base with a thin layer of tank with sudo reef sand ard 1cm, and place the nanas in
    Pardon my ugly placement
    ImageUploadedByTapatalk1421757616.062267.jpg
    ImageUploadedByTapatalk1421757634.147164.jpg
    ImageUploadedByTapatalk1421757645.231535.jpg

    And its done.
    Using no filter for non but am consider the upgrade to maybe 1ft but limited to available space.


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Feb 2014
    Posts
    177
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Nice setup, i love nanas as they are low-tech yet hardy plants which requirements are low and yet easy to maintain

    Looking forward to your complete setup with fauna!

  4. #4
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Short update
    ImageUploadedByTapatalk1421988569.955701.jpg
    ImageUploadedByTapatalk1421988603.187926.jpg
    Added water and my black betta
    Considering to upsize to 1ft.
    Waiting for mums approval

    Should i add some shrimps and corys?
    Dont think they will mix well though


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Betta tank set-up

    Quote Originally Posted by Hund Wong View Post
    Should i add some shrimps and corys?
    Dont think they will mix well though
    Best to wait until you increase the size of the tank and add a filter... your current small tank size and volume (3-4 liters?) without filter is only suitable for the betta... cories will add too much bioload and shrimps will get hunted and eaten by the betta in such small confines.
    :: Urban Aquaria ::
    www.urbanaquaria.com

  6. #6
    Join Date
    Feb 2014
    Posts
    177
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    i was thinking hmm if he didn't add a filter to his setup, wouldn't the tank take even longer time to cycle? Since he used sand as substrate, it would be very cloudy without filtration. Let alone adding in livestock immediately

  7. #7
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Quote Originally Posted by rakurime View Post
    i was thinking hmm if he didn't add a filter to his setup, wouldn't the tank take even longer time to cycle? Since he used sand as substrate, it would be very cloudy without filtration. Let alone adding in livestock immediately
    Hi bro, the tank doesnt seem to be cloudy as i change water every 3days.
    but only with a betta in it.
    will only will add in new livestock after i cycle the new set up.
    Still pending since i have limited space to put a bigger tank.
    max will be 1ft

    have two tank at gf''s house
    Attached Images Attached Images

  8. #8
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up


  9. #9
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Quote Originally Posted by Urban Aquaria View Post
    your current small tank size and volume (3-4 liters?) without filter is only suitable for the betta... cories will add too much bioload and shrimps will get hunted and eaten by the betta in such small confines.
    Maybe i should upgrade to 1 feet so at least 10to12 litres.
    1.Will a internal filter take up to much space?? Or HOF
    2. Will i be able to add more plants ? Since my sand is only around 1cm
    3. Instead of cories will otto be of better choice?
    4. Light choice advice
    - light watt output
    - photo period

    Current tank problems
    -Currently using aquasonic clipon led and some of the bottom leaves of nanas melting? Is it normal?

    -betta doesnt like to flare he will swim away and make more bubble nest. Eating & swiming healthy tough. Peaceful type maybe??




    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Dec 2014
    Location
    Singapore, Singapore
    Posts
    39
    Feedback Score
    0
    Country
    Singapore

    Re: Betta tank set-up

    Maybe aquazonic light not good enough?


    Sent from my iPhone using Tapatalk

  11. #11
    Join Date
    Nov 2012
    Posts
    7,120
    Feedback Score
    4 (100%)
    Country
    Singapore

    Re: Betta tank set-up

    Quote Originally Posted by Hund Wong View Post
    Maybe i should upgrade to 1 feet so at least 10to12 litres.
    1.Will a internal filter take up to much space?? Or HOF
    2. Will i be able to add more plants ? Since my sand is only around 1cm
    3. Instead of cories will otto be of better choice?
    4. Light choice advice
    - light watt output
    - photo period
    A 1ft/13 liter tank would be much better... get the L30 x D18 x H24 version which is a good standard "ADA Mini S style" size. Though if you have the space, a 1ft cube (L30 x D30 x H30) would be even better and can hold double the water volume (27 liters) and yet take up only abit more table or shelf area.

    Internal filter will take up valuable space inside the tank and be more visible, it will also transfer more heat into the tank too. Hang-on filter would be better in both aspects.

    If you are using a thin layer of sand as substrate, then just add plants which don't need to planted, can use more anubias, java ferns, bolbitis, mosses, bucephalandra etc, even many stem plants like water wisteria, hygrophila, barcopa, ludwigia can be grown tied to objects too... lots of choices.

    A few dwarf cories (ie. pygmy, hastatus or habrosus) would look nice, though an oto would be a more useful choice as it helps to eat algae film on the tank glass and plant leaves.

    For 1ft low-tech tanks with low-demand hardy plants, i find that LED lightsets like the Up Aqua T-Series or Easy Aqua V-Series work well, they are relatively affordable (around S$20) and run at a moderate 3.5W power (7 x 0.5W LEDs) which is more than enough light for those type of plants in a small tank. Most importantly, their light spectrums are designed for planted tanks.

    Photo-period should be 6-8 hours, sufficient for most low-demand plants and not too long to help minimize algae issues.

    Quote Originally Posted by Hund Wong View Post
    Current tank problems
    -Currently using aquasonic clipon led and some of the bottom leaves of nanas melting? Is it normal?
    Not sure about the light spectrums or intensity of the Aquazonic clip-on LED lights, but i guess if the bottom leaves of the anubias plants are melting, one of the reasons could be lack of light (or lack of usable light spectrum)... though it could also be lack of certain nutrients. But since they have only been recently added to the tank, those symptoms shouldn't be appearing so quickly (the anubias rhizomes store reserves which can sustain the plants for a while).

    More likely its just the older bottom leaves melting due to transition from emersed to submersed growth (i notice the anubias you bought are the ones grown emersed in pots).
    :: Urban Aquaria ::
    www.urbanaquaria.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •