Anyone using RO water? what is your system?

[loupgarou]

I'm trying to see is there anything better than this one currently I googled.


http://sg.ro-systems.com/acatalog/FS301-DI.html

roughly $400 for a system. I tried filling up my 50litre shrimp tank using water from a PUR pitcher . unfortunately a quarter tank water change takes like 4 hours to complete.

[Ingen]

Interested to know too.

[noidea]

How about this one.http://www.madpetz.com.sg//index.php...ucts_id=340400 gallon per day which is around 60 liter per hour. I am thinking of getting this one but need to find out the connection of both inlet and outlet to be able to connect to a garden hose.

[Ingen]

How many little of waste water to produce 60l? I think your link expired, can't view the product

[noidea]

1,500 liters per day. Don't know got waste water or not.

[loupgarou]

hmm, madpetz version seems cheaper than purepro version

both 400 gpd versions
http://sg.ro-systems.com/acatalog/FS-8000.html

http://www.madpetz.com.sg//index.php...roducts_id=340


---
100 gallon per day (but madpetz one takes 50 psi input, I'm not sure you can even hook it up to a garden hose) this one is like 15 liters in 1 hour, which is super slow. so you have to like put it on a timer or something and check back if the pail is full

http://www.madpetz.com.sg//index.php...roducts_id=395

the rest of purepro's offerings are 50gpd , so not worth considering.

so I think need to check

a) replacement cycle of catridges and cost of catridges, I'm pretty sure the initial 1 time cost is negligible in comparison to that.

[noidea]

hmm, madpetz version seems cheaper than purepro versionboth 400 gpd versionshttp://sg.ro-systems.com/acatalog/FS-8000.htmlhttp://www.madpetz.com.sg//index.php...roducts_id=340---100 gallon per day (but madpetz one takes 50 psi input, I'm not sure you can even hook it up to a garden hose) this one is like 15 liters in 1 hour, which is super slow. so you have to like put it on a timer or something and check back if the pail is fullhttp://www.madpetz.com.sg//index.php...roducts_id=395the rest of purepro's offerings are 50gpd , so not worth considering.so I think need to checka) replacement cycle of catridges and cost of catridges, I'm pretty sure the initial 1 time cost is negligible in comparison to that.

Thank you for the advice. 50 psi needed....hmm.