Your tank wall are slippery, try to scrap or clean the wall first
Hi,
I just bought an internal filter for my nano tank.
The suction gave way twice within a span of few hours.
Any tips to stick these suction so that it does not drop off so easily?
My internal filter is Aqua Zonic Evo EF-Baby.
Thank you in advance.
from 14L to 8L tank.
Your tank wall are slippery, try to scrap or clean the wall first
Thanks. I didn't think of that because I just took out the tank from my storeroom. That's a good point and I'll try to give it a scrub later. Thanks.
from 14L to 8L tank.
Some of the suction cups that come with tank equipment could also already have deteriorated/warped and become inflexible (especially if its old stock), so they are not as effective anymore. You can try buying various better quality aftermarket suction cups from LFS accessories displays that fit the filter mount and see if they work better.
Another I notice that if the suction pad degrade, try soak in hot water first before use. It helps
I f you just bought it, you can bring back to the shop to have it exchange...
Thank you so much for the responses.
I cleaned the wall and it gave way again in barely 2 hours.
I don't think I can visit the LFS these few days, so exchange may be a problem. Furthermore I have thrown away the receipt.
I tried removing the suction cap and was not able to detach it even though I gave it a long thud. Was trying to take it out for the hot water bath.
Now I am leaving it standing on the substrate with the support from the power head wire.
I will check out the after market suction cups probably in the weekend.
Thank you so much once again.
Cheers.
from 14L to 8L tank.
Use a lighter to gently heat up the suction area.. then cool it down with water.. with the suction area wet stick to your tank wall... it will settle your issue
I tried it and the suction was stronger initially. I could see the difference as compared with yesterday.
Unfortunately it gave way as well, this time it holds longer than yesterday though.
I will look for alternative.
Read a couple of reviews in Amazon and looks like other customers have similar feedback.
from 14L to 8L tank.
You could stick it to a magnet glass cleaner by using silicone or strong bonding glue like cryanoacrylate. Let the bonding agent cured for a few days. Check 1st if it is safe for aquarium use, I do not know how many types of it are there available.
If you've learnt, teach, if you have, give.
Don't walk behind me as I might not lead, don't walk in front of me as I might not follow. Walk beside me, as my friend.
Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.
another way to counter the weak suction will be use a clothe peg or clip to clip the cable and hold it to the height you want.
Bracket for pump.jpg
This is what happen when I'm too free, and fire can't save my suction cup....
DIY Stainless Steel Bracket.... Hahahhaa...
I just slot the internal pump in, and no worry that it will drop...
from 14L to 8L tank.
from 14L to 8L tank.
I bought it from UA.. Haha.. I need to check the brand and model tonight..
Heat generation depends on the wattage of the filter. If it is only 3-5watts. The heat should not be that great.
Bookmarks