might be air trap inside , hose dirty or impeller spoil need to change another one.
might be air trap inside , hose dirty or impeller spoil need to change another one.
confirm can get from Qian Hu, think C328, Y618 also should have better call before making your trip down.
you should open up and take a look... if the magnet and impeller is not stick together, you can DIY and repair yourself by sticking it back with super glue. if the flipper is broken , then have to change new one.
do some troubleshooting first...
Did you put too much media in the canister?
Did you happen to install a double tap at the inflow side and adjusted it lower?
Okay, sounds like either something stuck in the impeller, the impeller house is loose or the impeller is faulty. Either way just have to check and see.
Is there any crack at the impeller shaft?
Do you used the inflow or outflow tap regularly to control flow?
Can this be fix or I should get a replacement?
2015-08-14_07-04-08.jpg
I dont see anything wrong with it...
maybe this will help.
http://www.fishlore.com/fishforum/fi...ds-smooth.html
I will use super glue to stick it back
the newer 2213 Classic is nothing compare to the old made in Germany ones..too bad every company is going to the same way
Bookmarks