Help ! Chiller HS-66A inlet/outlet leak

[maverickd]

Hi Seniors,

Kindly help to point out my mistake. Just set up chiller in the morning. But discovered there a leak in the inlet and outlet connection at the chiller in the evening. Is my connection wrong ? Chiller was not on as i was cycling the tank. First time using chiller. Thanks in advance.

20151121_225801.jpg

[happydanio123]

Hi Maverickd! Hailea Chillers are very prone to having this problem: the connections leak when you twist the outlet/ inlet tube or the fastener (The round "nut-like" thingy) the "wrong" way. So I suggest that you give the inlet/outlet pipe a hard push down before tightening the fastener. Ifit doesn't work, then it's a manufacturing defunct.

[maverickd]

Hi Maverickd! Hailea Chillers are very prone to having this problem: the connections leak when you twist the outlet/ inlet tube or the fastener (The round "nut-like" thingy) the "wrong" way. So I suggest that you give the inlet/outlet pipe a hard push down before tightening the fastener. Ifit doesn't work, then it's a manufacturing defunct.

Thanks man... but i've mummified it with some self-fusing tape with good effect. If it does leak again, will try your method.

[happydanio123]

Ok. Good to hear that!

Sent from my GT-I9100 using Tapatalk