A DC is a much better choice as you can evaluate the results immediately but DC is very sensitive to strong light sources and will create a too contrasting photo.Originally Posted by wert
(this is for Digital Camera)Turn ON the fish tank light as usual. OFF the flash to minimise reflection from the glass. Set the camera to manual mode, preferrably shutter priority mode to a speed that you do not need a tripod (1/60 sec). Adjust the exposure setting to 1 stop under (or two stop if it is still too contrasting & so on...). Do bracketing.
(for DC or SLR cam)If you wish to do close up. Set your camera to wide angle, enable the macro feature for DC(the one with the small flower). Place your camera lens against the glass of the tank (touching the glass) & snap away! For this case, you can use flash as the lens is too close to the glass to register any reflection.
(for DC or SLR cam)A much better exposure is to have an extenal flash held on top of the tank above the water (ask someone to hold it for you) and your camera lens held against the glass of the tank as above. There are some external flash that has very long cable connector or there are some models that can syn with the built-in-flash in your camera at a short distance known as "slave" flash.
I hope this helps.![]()









Reply With Quote



Bookmarks