Your tank is very nice. is there a chiller for it? I think u should start a new thread.Originally Posted by danny
Your tank is very nice. is there a chiller for it? I think u should start a new thread.Originally Posted by danny
Cheers,
Andrew
Vincent - AQ is for everyone, but not for 'u' and 'mi'.
Why use punctuation? See what a difference it makes:A woman, without her man, is nothing.
A woman: without her, man is nothing.
Danny,
From a 6' planted tank owner to a new one... your filtration setup is inadequet. As it is currently, the water at the left side will not get filtered much. Your outlet is not even facing the other end. Your tank will likely get algae problems due to poor circulation.
Good circulation is essential for good distribution of ferts and CO2.
Suggestions:
- Split the filter inlet, one at each end.
- Extend the rainbar and run it near the bottom across the back.
Something like the bottom... (# are the inlets).
Code:^ V ^ | | | | | | | | | | | | | | | | | | | | | | +----Rainbar------ | | | # # | | | +-----------------------------+
Vincent - AQ is for everyone, but not for 'u' and 'mi'.
Why use punctuation? See what a difference it makes:A woman, without her man, is nothing.
A woman: without her, man is nothing.
just what i was thinking Vinz..lol
actually you can do it like i do. I have inlets and outlets at both ends. one set is for filtration, the other set for chiller powered by an eheim pump
Hi all, thanks for all the suggestion. I only use the Jebo to polish the water due to the suspended particles of the new gravel. This tank will use at least 3 canister when it is in full operation, mainly from consolidating my other tanks elsewhere.
I will be running 1xJebo 858, 1x Atman 3338 and either a Ehiem 2228 or 2215. I have holes made at both ends and in the middle of the top brace.
Tank will use 3x 4ft 2x55w Magnum II.
Will decide on a chiller later.
Danny Chng
I see. You may want to cross the outlets and inlets, so that the water has a chance of being distributed throughout the tank.
E.g.:
Left filter outlet on the left and inlet in the middle.
Middle filter outlet on the right and inlet on the left.
Right filter outlet in the middle and inlet on the right.
Water from the middle comes out on the left,
water from the left comes out right,
water from the right comes out in the middle,
cycle continues.
Vincent - AQ is for everyone, but not for 'u' and 'mi'.
Why use punctuation? See what a difference it makes:A woman, without her man, is nothing.
A woman: without her, man is nothing.
totally agreeOriginally Posted by vinz
that's exactly how i set up my 2x2028s except the inlet/outlet positions are reversed and i use rainbars for both outlets.
the long rainbar distributes co2 pretty evenly throughout the tank.
with a 2.5ft ht, i still have some dead spots at the corners. so i drilled some holes in the outlet corners (where it bends) so that water circulation gets into the corners. being KS, i have 2 eden rotating powerheads in the tank as well![]()
Cheers,
Melvin Lim
when are you posting up the pics for your aquarium, with a mammoth of a tank like that.... i really wanna see what can be done with it WohhoOO ! heheh only dream to have a tank that size
Holy is the Lord, God Almighty ! The Earth is filled with His Glory !
90 x 50 x 50 cm tank: Eheim 2217; ANS CO2 Solenoid with 60mm intense bazooka; Zetlight 6400; Teco 500 Chiller; Borneo Wild Steel inlet/outlet
Ferts: Dry Mixture/Dr Mallicks. Temp: 26 degrees Substrate: ADA Amazonia
nice tank and good equipment u got.
cant wait to see your tank...
24" x 12" x 12"
Hopar T5 14w 10000k x 4 (12pm-8pm)
EHEIM 2213
2.5L CO2 + Solenoid + Diffuser
Holland sand + Azoo root ferilizer + PMDD
Heh, I see we're on different ends of the tech treeAnyway, got a few questions for you. How do you intend to plant it? And what kind of fish do you intend to put in it? Either way, good luck with your tank =) And thanks for the lessons I'll udoubtedly learn from your experience
![]()
I keep mostly corydoras, so there will be much open ground for the cories thus also the fine sand part in front of the tank. Plants will be mainly crypts and echindorous cos I travel quite frequent.
Just put in some plants. Will add more later when have time. Also the DW is still not in yet.
Danny Chng
Oh, do you want a fully grown Echinodorus sp. then? It is about 2ft tall and had been grown submersed for a long time and can be easily transferred. I am looking for a owner for this plant as I want to re-scape my tank and it is not in the new plan! Anyway, PM me if you are interested. The older leaves can be trimmed off to create a smaller plant. Pic of the plant can be found at http://www.arofanatics.com/forums/sh...d.php?t=194719
Read me! :bigsmile: http://justikanz.blogspot.com/
I'm crypt collecting... Starting cheap, now have Cryptocoryne beckettii, C.beckettii var petchii, C.crispatula var.balansae, C.griffithii(Melted!), C.nurii, C.parva, C.pygmaea(Melted!
), C.tonkinensis(Melted!
), C.walkeri, C.wendtii 'Brown', C.wendtii 'Green', C.wendtii 'Green Gecko', C.wendtii 'Tropica' and Cryptocoryne x willisii
Oh, juggling is hard work, man!...
so envy u hv such a big big tank orh~~~Originally Posted by danny
![]()
Oh yeah danny, think you can give me the contact of the guys who made the cupboard for you? I'm running into alot of trouble doing it myself.![]()
Just got back yesterday.
Some update of the plants, crypts have melt but throwing off new shoots.
Danny Chng
nice tank u got there
The background makes it look a little empty though. And the lights a little eerie... heh, Nice touch with the white sand though. I suppose that's going to be some kinda clearing when you're done.
such a big tank donno need how many plant to full fill it~ -.-!!!
Bookmarks