Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Question Regarding DIY CO2

  1. #1
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore

    Question Regarding DIY CO2

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    2 cups of sugar, 1 tsp of soda, 1/4 tsp of yeast, 1.5litres water, is my formula. Is there any wrong?
    Did you guys shake hard after adding the water?
    How long will it take to bubble? I have being waiting for 2 days, still no bubbling.
    Can seniors here pls enlighten me?

  2. #2
    Join Date
    Oct 2005
    Location
    Hougang
    Posts
    3,747
    Feedback Score
    0
    Images
    199
    Country
    Singapore
    That's correct...
    Did you use abit of warm water?
    I don't shake the bottle after I add the yeast... I only shake when I want to dissolve the sugar...
    ~ Vincent ~ Fishes calm your mind...
    http://www.flickr.com/photos/valice/





  3. #3
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Quote Originally Posted by valice
    That's correct...
    Did you use abit of warm water?
    I don't shake the bottle after I add the yeast... I only shake when I want to dissolve the sugar...
    I use tap water and dont shake. dont know why it took so long still havent bubble. Is it usually so long to start off?

  4. #4
    Join Date
    Mar 2006
    Posts
    462
    Feedback Score
    0
    Images
    104
    Country
    Singapore
    Open the cap and listen to the yeast mixture closely do you hear hissing sound ? If yes that it means the fermentation is OK and could be a leak in your fitting somewhere.
    Try put some blutak around any suspect leak area (usually around the tube and the bottle cap) and see if it helps.
    If you didnot hear any hissing sound, likely the yeast is bad, try buy some new stock to try again.
    One more thing : how much water you fill in the bottle ? You need to leave some air space, e.g. around 1 liter water in 1.5 liter bottle. As it could be also due to insufficent oxygen in the water to kick start the culture. Yeast actually goes thru a stage 1 of respiration stage (consume oxygen) before stage 2 the fermentation stage.

  5. #5
    Join Date
    Dec 2001
    Location
    Woodlands
    Posts
    3,938
    Feedback Score
    0
    Images
    54
    Country
    Singapore
    Your mixture is good.

    Is your yeast still good? Expired ones are useless. If there is foaming in the mixture, it is good.

    How you connect to your tank? You using a ceramic diffuser? That would not work too. Best is normal tubing and collect the gas under an inverted bell or input it into a CO2 reactor.

    I used this for reference: http://www.thekrib.com/Plants/CO2/co2-faiz.html
    But I do not use any air-stone though.
    koah fong
    Juggler's tanks

  6. #6
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Quote Originally Posted by juggler
    Your mixture is good.

    Is your yeast still good? Expired ones are useless. If there is foaming in the mixture, it is good.

    How you connect to your tank? You using a ceramic diffuser? That would not work too. Best is normal tubing and collect the gas under an inverted bell or input it into a CO2 reactor.

    I used this for reference: http://www.thekrib.com/Plants/CO2/co2-faiz.html
    But I do not use any air-stone though.
    I'm using a ceramic diffuser!! But why wont it work? And I also found out that mine had expired!

  7. #7
    Join Date
    Nov 2004
    Location
    Woodlands
    Posts
    1,065
    Feedback Score
    0
    Images
    11
    Country
    Singapore
    Ceramic diffusor works with pressurized CO2, only then co2 be forced out with the pressure. try the other option suggest by juggler.
    The Happiest of people don't neccessary have the best of everything;
    they just make the most of everything that comes along their way


    When will there be 25 letters in the alphabets?

  8. #8
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Oic! Mine is a 1.5ft small tank. Its very ugly and space consuming to put an inverted bottle to trap the CO2. Wanted to ask you guys, usually how long it take to start producing co2?

  9. #9
    Join Date
    Aug 2004
    Location
    Serangoon Central
    Posts
    352
    Feedback Score
    0
    Country
    Singapore
    The time varies according to the solution mix and your set-up (length of hose, etc). Typically, CO2 should be produced in a manner of hours till 1.5 days maximum. At least by my experience.

  10. #10
    Join Date
    Jan 2002
    Location
    Singapore (West-Central)
    Posts
    978
    Feedback Score
    0
    Country
    Singapore
    I use the Nutrafin container plus the tube and diffuser that came with the original packing, only the ingredients are from my kitchen.

    Maximum time taken's about 4 hours.
    P-L-E-C-O-R-Y=M-A-N-I-A!!! YEAH!
    FLORENCE, capital of the region of Tuscany, has a population of around half a million inhabitants, spreads on the banks of the Arno, between the Adriatic and the Tyrrhenian seas, almost in the middle of the Italian peninsula. It is a city which bustles with industry and craft, commerce and culture, art and science.

  11. #11
    Join Date
    Feb 2006
    Posts
    143
    Feedback Score
    0
    Images
    1
    Country
    Singapore
    Quote Originally Posted by hirowen
    2 cups of sugar, 1 tsp of soda, 1/4 tsp of yeast, 1.5litres water, is my formula. Is there any wrong?
    Did you guys shake hard after adding the water?
    How long will it take to bubble? I have being waiting for 2 days, still no bubbling.
    Can seniors here pls enlighten me?
    I presume you have 1 cup of uncooked rice in it?

  12. #12
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Looks like have to use back the nutrafin co2 flipper again.

  13. #13
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Quote Originally Posted by aqualover
    I presume you have 1 cup of uncooked rice in it?
    Nope i did not add any rice in it

  14. #14
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Well, Is it alright to add a check valve?

  15. #15
    Join Date
    Aug 2004
    Location
    Serangoon Central
    Posts
    352
    Feedback Score
    0
    Country
    Singapore
    Yes. A check valve is good to prevent water for the tank from being sucked into the yeast solution.

  16. #16
    Join Date
    Mar 2004
    Location
    Tampines
    Posts
    536
    Feedback Score
    0
    Images
    13
    Country
    Singapore
    Yes! Finally works! I changed it to flipper instead of using ceramic diffusor. Secondly, i bought the new yeast. Now i used back the nutrafin bottle as well. Regime is 1 cup sugar, 1 tsp soda, 1 tsp yeast. After 1hr straight away produce co2!

  17. #17
    Join Date
    Jul 2006
    Location
    Simei
    Posts
    111
    Feedback Score
    1 (100%)
    Images
    4
    Country
    Singapore
    how this one formula?

    vinegar + baking soda?
    in a DIY generator?

    pix of generator at bottom of first page and top of second page..
    http://www.flickr.com/photos/fusionstream/

  18. #18
    Join Date
    May 2006
    Location
    Tampines
    Posts
    315
    Feedback Score
    0
    Images
    1
    Country
    Singapore
    For the reactor, can use those small mini plastic containers which foodstall vendors normally put chilli and sauces in. The small "tau-huay" tub type. I inverted one and put the air tubing through a hole i made on the bottom of tub. If anyone interested or confused can pm me and I will try to post pictures.
    Yours Truly, Avan

    I went into the woods because I wanted to live deliberately. I wanted to live deep and suck out all the marrow of life... to put to rout all that was not life; and not, when I came to die, discover that I had not lived.

    ~ Henry David Thoreau

  19. #19
    Join Date
    Mar 2006
    Posts
    462
    Feedback Score
    0
    Images
    104
    Country
    Singapore
    Quote Originally Posted by BlueStream
    how this one formula?

    vinegar + baking soda?
    in a DIY generator?
    Will the reaction last for long ?

  20. #20
    Join Date
    Feb 2005
    Location
    Yishun, Working @ Bukit merah area
    Posts
    565
    Feedback Score
    0
    Images
    41
    Country
    Singapore
    vinegar + baking soda...this reaction is fast and produce definitly lots more co2.
    i doubt this fomula works, and beware of co2 poisoning
    i'm ADDicted to this wonderful hobby

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •