Hi,
• Have you try plumping the bowl with those traditional pump, the
one with a black rubber head
• Thinner will only help a little to corrode the surface of the air pump
cover and hoping to melt the cover entirely will likely be impossible.
Btw the thinner we use are already diluted before its bottle and
even you got hold of those extreme strong type, question is will it
melt your neighbour pipe below??
• Use a tube form a U shape drain the filthy water out, then use your
hand to feel for the cover in the bowl, check if it is within reach to
pull it out.
• What is the piping that linked the sewage system to the toilet
drainage, was it PVC or steel tubing column? If this PVC tubing,
normally for every elbow there’s a opening for a circular cover (you
can see it in your own toilet), however you can only access your
portion “ below you” – meaning your neighbour got to allow you to
go down his house open the cover to clear where it’s stuck there.
• Last resort, got to engage a contractor to unscrew the 4~6 screws
that holding the bowl down. After which you should be able to
remove the cover…….
Hope it help









Reply With Quote

Great for bragging rights.

Bookmarks