ADA stand 60p
Just finishing up my ADA style DIY stand and need to cut the pieces for the door and the piece above the door, however here is the problem:
The height of the stand is 84cm, what would the porportions be for the door and the piece above the door.
Should the piece be 1/5 the height of the door, 1/4 the height of the door or something else.
Any one with an ADA 60 Cm stand that can give me the height of the door and the height of the piece so I can figure out the ratio and do mine similiar?
*/Tank Specs*/
50Gallon (90 X 45 X 45) Tetra Ex120, CO2 @1~2 bps, 4X30 watt @8 hrs
29 Gallon (61X40X45cm) DIY ADA stand, Eheim 2215, Fishline 48w T5 light @8hrs
17 Gallon Mr.Aqua (60X30X36cm) DIY ADA stand, Fishline T5 lights 48watts @7 hrs
Tank in Progress (120X60X55cm) DIY sliding door stand, Reef style tank w/ SUMP+Eheim pump, T5- 6X54w
Bookmarks