Need help with Atman CF1000

[Aeon]

My Atman doesn't come with proper instructions, just a chinese pamphlet with features and specs. The problem is I don't know what to do with the 4 O-rings that was packed with the inlet and outlet valves.

There are 2 small ones and 2 bigger ones. I don't know where to attached them.

[jiahe88]

if not wrong. .outlet mostly is big want and inlet is small want. . if you able to get some picture is more easy to explain. .my privious is using cf600 all is small. .

[Aeon]

Both in and out valves are the same size.
I'll post some pics in a while, charging my digicam.

[Aeon]

Pictures.


Shot with DSC-P8 at 2007-07-10


Shot with DSC-P8 at 2007-07-10


Shot with DSC-P8 at 2007-07-10

[eddyq]

I thinks those O-rings are spare ones. When you hooked up everythings and there no leak then that fine. If you encounter leak, then put the O-ring (maybe it the bigger one, you guage) into the hole of picture no:3. In picture no:2 there a O-ring already attached.

If all fail, check with store you brought from or NA, Mr Chan might help.

[henree]

these are spare o-ring, you wouldn't need them in first hookup. I run my atman filter without installing these 4 o-ring, so far so good, no leak detected.

[Aeon]

There's no O-ring in no.2 actually.

Thanks! I'll use it w/o the rings in the first hookup.