Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 5 of 5

Thread: Lighting for a Fern Setup

  1. #1
    Join Date
    Jul 2005
    Posts
    159
    Feedback Score
    0
    Images
    8
    Country
    Singapore

    Lighting for a Fern Setup

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Hi all,

    I have a question with regards to lighting for my slow growing plant set up in my 30 gallon tank, measuring 900x360x360. Lighting consist of 2 FL tubes at 30watts each. Would you recommend

    (1) 9hrs lighting with 30watts FL ( less light longer hrs )
    (2) 4.5hrs lighting with 60watts FL ( bright light less hrs )
    (3) other options

    The reason i am asking i because I was wondering if there are any other lighting regime for slow growing plants which require mild lighting. I tend to get small amount of green algae growth on the top of some bog wood closest to the water surface when i go 6-9 hrs at 60watts. It stops when i reduce lighting to less than 6 hrs.

    other parameters:

    Flora is mainly Ferns,Nanas and Bolbities. Co2 at 2 bubbles per sec. Just added ADA brightly shade purchased yesterday, and according to instructions, 5ml everyday for my tank size.

    Thank you in advance
    Bern still suck at Water Chemistry + Plant Names

  2. #2
    Join Date
    Oct 2007
    Posts
    180
    Feedback Score
    0
    Country
    Singapore
    I believe Ferns are low light plants, so I would go for the lower light for 9 hrs if that is the only 2 options.

    What I learn from the brothers here, more light = more CO2 = more ferts, anything which is not enough = algae will grow.

  3. #3
    Join Date
    Jul 2005
    Posts
    159
    Feedback Score
    0
    Images
    8
    Country
    Singapore
    Quote Originally Posted by larlee View Post
    I believe Ferns are low light plants, so I would go for the lower light for 9 hrs if that is the only 2 options.

    What I learn from the brothers here, more light = more CO2 = more ferts, anything which is not enough = algae will grow.
    Thanks for advise larlee, right now i'm doing 9hrs on 30watts as you have suggested. Will see if plants grow healthy and bright.

    To add on i was wondering what actually does plants with 'mild light' requirement mean. Does it mean its not healthy for ferns to get high lighting level? ( assuming a proportionate increase in fert and co2 levels to go along with lighting)
    Bern still suck at Water Chemistry + Plant Names

  4. #4
    Join Date
    Jun 2006
    Location
    Jakarta, Indonesia
    Posts
    476
    Feedback Score
    0
    Country
    Indonesia
    They will still grow nicely in high light environment provided you could balance the condition, avoiding excessive algae problems.
    The ferns will just grow much faster and in most cases much bigger.

    Just check out my clump of microsorum grown under strong MH light. Used to be no bigger than a plate.


  5. #5
    Join Date
    Jul 2005
    Posts
    159
    Feedback Score
    0
    Images
    8
    Country
    Singapore
    Quote Originally Posted by medicineman View Post
    They will still grow nicely in high light environment provided you could balance the condition, avoiding excessive algae problems.
    The ferns will just grow much faster and in most cases much bigger.

    Just check out my clump of microsorum grown under strong MH light. Used to be no bigger than a plate.
    Woo! Thats a new perspective for me. Thanks, your picture is most convincing medicineman! Will try out and see what happens next
    Bern still suck at Water Chemistry + Plant Names

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •