maybe your tank is not mature enough, give it some more time. wait for the bb to grow in yr cannister first. maybe you can try changing 50% of the water instead of the weekly 30%.
my 2 cents worth. hope this help.
Hi guys,
Recently I have setup my 4 ft planted thank using ADA amazonia II for my substrate. I've read on the forums saying that ADA amazonia II is suppose to be cleaner & clearer than ADA amazonia.
However my tank is now at least 3 months old, & my water is still dusty as before. It is dusty & not cloudy, as in I can actually see the particles floating in the tank.
I had 2 brand new filters installed, a Eheim 2028 & 2210. So I think there's enough filtration running for a 4 ft tank. I also changed 30% of the water every week. I even did clean up on my ehiem 2028, as i thought it's clogged & dirty. After a week, the picture never changed. And that water is still remains as dusty.
Initially I had 4 cories & i thought they are culprits, so I gave them away, & that situation still has not changed. Next I took out my discus, & it is still the same. Currently i had cardinals, fucarta, rummy nose, cherry barb, rock shrimp, a variety of dwarf chiclids, 2 bristle nose plecos. The water is still as dusty. Is there any bros out there who could give me some advice on how to clear the dust? Below is the link of my previous where you can see my tank.
http://www.aquaticquotient.com/forum...ad.php?t=37240




maybe your tank is not mature enough, give it some more time. wait for the bb to grow in yr cannister first. maybe you can try changing 50% of the water instead of the weekly 30%.
my 2 cents worth. hope this help.
Dusty, not cloudy? How fine is gaps of the wool in your filter?
How long does it takes for the tank to mature? I've even added BB powder into the tank. Anyway's i'll try changing 50% of the water.
The wool is the original white wool that comes with the filter from Ehiem. It's pretty thick & dense too.



Give your tank sometime. When I started, I had to wait for half year before my 4ft became cystal clear.
What's the layout of your inlet and outlet of your 2 filters? Could it be flowrate too strong?
If you can't wait, you may try Seachem Purigen. I tried it once with good result.
Alternatively, a few years back, folks here raved about diatom filter, you may consider that if it is still available. A filter that could polish your tank water in a few hours using industrial filtration material such as those used for swimming pool.
Maurice Cheong
A . M o m e n t . o f . T r a n q u i l i t y...
I'm using Angel Super Bact. Is Ocean free A - Z powder good? Or liquid ones are better?
Are you using ADA Amazonia II too? I can understand if it's Amazonia, but for Amazonia II to be in this condition. Something must be really off. They even claim to have clear water in overnight!
The inlet for my 2028 is on the left side with surface skimmer, and the outlet is on the right with water flowing towards the left side. The 2210 is on the right side with water flowing to the left side.
I don't think my water flow is too strong, because the 2028 is connected to a chiller before the water flows out into the tank. And the 2210 is connected to a Aqua medic 500 internal C02 reactor, so I don't think the current will be that strong that it'll disturb the substrate.
Maybe i'll give Seachem Purigen a try. Don't really want to complicate my setup further more to setup diatom filter as the pipings will drive me nuts. Will Seachem Purigen last after a single use, or do i have to use it
continuously to achieve the result?





You should try to change more water to see if the dust is due to algae bloom of fine dirt particles. Otherwise, maybe you can try ADA Clear Dash, works for me as I only used half and the problem is solved. PM me if you want to get from me.



Could the "dust" be micro-bubbles? My tank has the same thing as well. Has the same dusty effect.



Hi bro, if i am not wrong your tank substrate is fully expose to the current from the rain bar right?? If my guess is right, think you could either change the direction of water flow, and maybe plant something on the substrate to prevent the current from stirring up the substrate.
Bookmarks