Have you primed it? (sucked on the output hose so water fills up the canister via the intake hose)
You may be running the impellor dry
Have you primed it? (sucked on the output hose so water fills up the canister via the intake hose)
You may be running the impellor dry
Oh yes as i have use this filter for some time, anyway this happen when the filter is running
No Man Plan To Fail They Only Fail To Plan
it is highly likely that your filter got air locked. stop your filter and remove the inlet/outlet tube attachment. fill up the filter with water.
thomas liew
Is your filter at the same level as the tank? It needs gravity to work properly. Just guessing...
ck
No the filter is below the fish tank
No Man Plan To Fail They Only Fail To Plan
Agree could be a priming problem. Can try the methods in this thread http://www.aquaticquotient.com/forum...ead.php?t=1541
I have also tried using a siphoning hose to prime the filter. I connect the intake end of the siphon to the output end [in the tank] of the Eheim. Turn on the filter and then start pumping. Hopefull this provides enough suction to start the cycle.
Good luck!
koah fong
Juggler's tanks
Bookmarks