Hang on Ronnie.
I solved this problem several years ago, but will have to search old files for the pics.
Basically, I made an inverse "U" out of pvc pipe, with a hose fitting on the long end. Weight of hose and pvc assembly kept it down. The short end attached to the float valve, and a friction fit polyethylene washer on the long piece caused it to hang on the tank at any height I wanted. Just slide the washer to set the fill height, and never have a wet carpet, again.
I know, hard to visualize. I'll have to find an old pic.
Wright
01 760 872-3995
805 Valley West Circle
Bishop, CA 93514 USA
Bookmarks