bro i think u need to use a good filter to remove the fine particles from the water first and prevent it from getting onto the plants




bro i think u need to use a good filter to remove the fine particles from the water first and prevent it from getting onto the plants



when i scape mt tank the particles then to cloud the water and then after it settles it lands on the plant. im using a top filter cause was recomened by the shop. but in this forum like everybody using internal filt

I won't be surprise since you are using overheat filter, the downward flow stir the soil. You might want to change your filter or find a way to reduce/redirect the flow




when you stir the soil during a scaping, the soil particles will float around the water and they have to land somewhere. This will happen whether you are using aqua soil, or base fert , or any other soil. You just need to be very careful. I have had this problem for the longest time and recently managed to get it under a little control
1) When you scape or rescape, remove 90% of the water and work with maybe 2 or 3 inches of water in the tank, this will keep the particles in the lower half of the tank when you fill it up with water again, it will not remove the particles altogether, but it will be much better.
2) After you scape, put in a cheap internal filter, maybe about 400L/hr will do, and this will help to suck up the particles. This is what some hobbyist call "spot cleaning". I have tried it recently and it works quite well. It wont clear up all at one go, just stir up the plants to shake off the particles and the internal filter will do it's job.



alright thanks all. my overhead filter got an L join to redirect the flow. but just wondering which type of filter is more advisable to use?

canister filterhang on back isn't that bad but can't connect CO2 external regulator on it.
Last edited by Shadow; 31st Mar 2009 at 17:55.




if you are into planted....the cannister will be the recommended one....
Overhead or HOF will have problem of casing excessive loss of CO2 if you are into injecting CO2. there is also limitation on the positioning of the in and outflow.
Internal filter have problem of taking up precious planted scape space and potentially heat up your tank (plants always do better in cooler water in our part of the world). maintenance is a little messier.
Bookmarks