External Thermostat

[Tian85]

Using the Fox external thermostat. Setting is 25.5 degree and difference is +-0.5 degree. It will kick start at 26 degree but will onli cut at 25 degree. is this normal for a delay in cutting of the thermostat by 0.5 degree.

Thanks

[Cross]

There is a setting which makes it cool down which makes it chill down .5 lower then preset when temp reaches .5 higher than preset. if you just want it to cut off at 25, its another setting, not this one. the instructions manual does give some example on this one

[Cross]

dl5 when u enter the menu has choice of P or Pn. what is happening to your setting now is a Pn setting. change it to P and it will start at 25.5 and cut at 25

[Tian85]

Thanks for the reply. call up the shop and they have solve my problem .