I use the 5ml standard for the other commerical brands that are common most places like TMG/Flourish.
But this is not a precise level or residual certainly youm are trying to achieve.
If you keep the PO4, the NO3 nd the K/CO2/GH is good shape, then starting with 5mls even if there is 1.3ppm of Fe present should be okay, I've had 2ppm of Fe(not 0.2ppm) in my tanks before photo shoots etc.
But if you have everything is good shape and manipulate one nutrient dose at time, in this case the traces, then you can assess the amount you would need for this product.
Use the plants as the indicator. You will need to maintain good conditions for around 3-4 weeks whilesticking with your dosing routine of traces(Say one 3-4 week period at 5mls, one period at 2mls and another at 4mls etc) and see which is best. If there is no difference between 4 and 5 mls 3x a week, then adding more than this will not help improve plant growth any further.
This test works best on high light tanks since they will have the highest uptake rates and would provide enough traces at the max uptake rates. If youadd more or excess traces it will not matter, it's better to have a little excess than too little.
I have used Kent,Sera, TMG, Plantex dry mix traces(2 tablespoons+500mls of DI water), and Flourish for these ranges. Never used Lush grow. Cannot say much about it therefore.
I use 5mls 3x a week for 75-80 liters of water on a tank with 0.75 w/liter.
Your tanks likely do not need anymore than this.
Regards,
Tom Barr
Bookmarks