Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 9 of 9

Thread: Lights/CO2 strategy & help identify plants..

  1. #1
    Join Date
    Apr 2003
    Location
    Taiwan
    Posts
    13
    Feedback Score
    0

    Lights/CO2 strategy & help identify plants..

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    How should I time the following?
    - Lights
    - CO2

    I am thinking of the following strategy:
    Filter = 100% of the time?
    Lights + Co2 = 2pm ~ 10pm. (CO2 off at other time)

    Do I need air bubbles?

    Goal is to maintain ph 6.8 ~ 7.3 for plant growth.
    Thoughts etc will be appreciated.

    Also appreciate if someone can help me ID all the plants in these pics.
    www.pbase.com/ycwoon/inbox
    They gave me the chinese name, so I do not know what it is..
    Thanks in advance...


    Beginners Info Sheet
    --------------------

    Tank Dimensions (LxWxH): 36" x 15" x 18"
    Tank Volume (litres or gallons): 32G/120L (approx)
    Lighting Intensity(No of Watts) : 90W
    Type of Lighting (FL/PL/MH) : Classica Super Sun 7000K
    No. of Hours your light is on : ~8hrs
    CO2 Injection Rate (bps) : ~ 1 BPS
    Type of CO2 (DIY/Liquid/Tank) : Tank
    Method of Injection (e.g. Diffusor/Reactor): Reactor
    Substrate Used : TaiKong No water change + Monterrey sand Mesh #8
    How Thick is your base fert : none
    How thick is your gravel : 3"~5"
    Liquid Fertilizers Used : None
    Frequency of fertilization : NA
    Tank Temperature : 28C
    Type of Filter (overhead/internal/canister) : Canister Jebao-Taiwan answer to Eheim
    Filter media used : Filter - Bio (Taiwan brand)-Filter-Filter
    How long has your tank been set up : 6 days
    Other equipment : none

    Chemical Properties (Fill what you can)
    ---------------------------------------
    Carbonate Hardness (KH): 6
    Total Hardness (gH): unknown
    pH : 7.5
    NH4 (ppm): unknown
    NO2 (ppm): unknown
    NO3 (ppm): 12.5
    PO4 (ppm): unknown
    Fe (ppm): unknown

    Bioload (Your Fish and Plants)
    ------------------------------
    Shrimps x 10
    2 x Fake SAE
    2 x Oto
    1 x Betta Splenden
    6 x Guppy
    1 x small "Catfish"

    Plants-
    Some Riccia
    Others do not know...

  2. #2
    Join Date
    Dec 2001
    Location
    Duck pond
    Posts
    2,654
    Feedback Score
    0
    Images
    84
    Country
    Singapore
    let me try to go through this without losing track.... i suffer from a limited attention span as well as low tolerance of certain other things...

    Lights & CO2. They normally go together. Most people on for 10 hours nonstop a day. Since you are using a pressurised CO2 cylinder and regulator, a Solenoid Valve is required to electrically 'switch on' the CO2. Just hook up the solenoid and lighting to an automatic timer available at most hardware shops and set your preferred timing.

    Filter? most people i know on 100%. SOme maybe dun, but these are trying very hard to save on power bill or too lazy to do research.

    I am thinking of the following strategy:
    Filter = 100% of the time?
    Lights + Co2 = 2pm ~ 10pm. (CO2 off at other time)

    You don't need air bubbles. Maybe the fishes do, esp if the CO2 is on when lights are off.... otherwise no... plants should provide the oxygen enuf.

    I feel pH of below 7 is best for planted tanks.... your 7.5 seems on the high side, probably due to the high KH. assuming your testing is fine, check if there's KH-increasing stuff in the tank or filter (e.g. coral chips, shells)..... you could consider adding peat extract (those Blackwater formulas) to lower the pH.

    Plant ID resources are at www.tropica.com and www.dennerle.de. Or at the gallery on this very site..... some people apparently so free so as to take pictures of plants to help others identify them leh.... slowly learn the latin names and after a while you won't have to rely on unreliable shop assistants.

    you dun have base fert? why not?

    6 days is a mite too early to be adding so many fish.... nitrate shouldn't be a big problem...... yet.... but strongly suggest you test NH4 and NO2, which are more toxic and build-up fast in new tanks. Since you already have fish, feed as little as possible and change water very frequently, maybe twice a week (50% each time) to ensure that NH4/NO2 remain low.... once their levels are low and stable (keep on testing) your tank is cycled and you can possibly add more fish.

    also add more plants... they help speed up the cycling time.


    finally, what are those white plastic things on the front of yur tank?????


  3. #3
    Join Date
    Sep 2002
    Location
    Spore
    Posts
    77
    Feedback Score
    0
    Maybe those white plastic things are weights for riccia? Wild guess only. Wire mesh would look nicer though
    "In war, whichever side may call itself the victor, there are not winners, but all are losers."
    Neville Chamberlain 1869 - 1940

  4. #4
    Join Date
    Jul 2002
    Location
    Singapore
    Posts
    4,088
    Feedback Score
    0
    Country
    Singapore
    Please do not add anything to control the pH except CO2 if you wanna use the pH/KH table to find how much CO2 you are injecting. If you add peat you would screw up the relationship..(much like me using aquasoil...look like I'm going to dig up the stuff and change for later use.)[]
    Plant Physiology by Taiz and Zeiger

  5. #5
    Join Date
    Feb 2002
    Posts
    1,219
    Feedback Score
    0
    Images
    107
    Country
    Singapore
    Yah, they look like box grids used to contain riccia. Not very popular, cos its quite ugly. In the third picture, there is another unidentified white thing, which i assume is a fish (looking at the bottom).

    regarding the plant names, it is easier if you look at online plant database like www.tropica.com . Briefly, you have Egeria densa, Myriophyllum aquaticum, Riccia fluitans, Hemianthus micranthemoides, Bacopa caroliniana, Alternanthera reineckii etc.



    ck

  6. #6
    Join Date
    Apr 2003
    Location
    Taiwan
    Posts
    13
    Feedback Score
    0
    First of all, so sorry for all the so basic question and so sorry for the late reply. Gotta work today.

    I will try out 8hrs and if the plant is NOT growing, I will try 10hrs. One of them has started to yellow...

    Yes the front thing is the grid box for the riccia. Seems ugly, but they said when it grow, stuff in ito the sand! Yet to find small sized plastic grid in Taiwan and I do not trust the stainless steel (don't trust em') and .. I only go to two LFS here and thus my choice for the moment quite limited, quite busy with work, time is bad!.

    Thanks for all the tips! Bought some more plants today and will put them in the tank, just simply hantam! Hope I do not hit the wrong one!

  7. #7
    Join Date
    Oct 2008
    Posts
    48
    Feedback Score
    0
    Country
    Singapore
    hmmm... bro, ricca on stainless steel is pretty nice. if you did not have any base fertilizer, your plants might have problem growing, esp those with roots.
    try to increase the lights timing and see the outcome. ricca grows easily with lots of light and enough co2. I used to use pl lights but the growth rate is too slow. then change to t5, now i have too much.. hahaha
    keith

    my 4ft is doing well...

  8. #8
    Join Date
    Sep 2006
    Location
    Bradell
    Posts
    259
    Feedback Score
    0
    Country
    Singapore
    bro keithtoh, why are you digging these old thread?
    New 2ft Project Coming Up
    Aquascaping since 2006-Present

  9. #9
    Join Date
    Oct 2008
    Posts
    48
    Feedback Score
    0
    Country
    Singapore
    ops.. did not realise.. just going thru all the thread.. hahaha.. blur...
    keith

    my 4ft is doing well...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •