Help on operating AL-60

[Malodaus]

I have recently obtained a second hand AL-60 from a friend of mine. I am clueless as to how to set it up. I am looking at using it for a 1ft shrimp tank. Does anyone have any advice on how I can go about setting it up? There was no hose that came along with it, what size should I be getting in this case?

Sent from my SM-G973F using Tapatalk

[genki89]

U will need a water pump to pump the water through the temp chiller.

I am assuming the tube size are the same as AL 30; u will need 9/12 mm tubing. Otherwise, it will be 12/16 mm tubing (unlikely).

Most of us will connect an external filter to the chiller. So in layman term it will be

Tank -> external filter -> chiller -> tank


Sent from my iPhone using Tapatalk

[Malodaus]

U will need a water pump to pump the water through the temp chiller.

I am assuming the tube size are the same as AL 30; u will need 9/12 mm tubing. Otherwise, it will be 12/16 mm tubing (unlikely).

Most of us will connect an external filter to the chiller. So in layman term it will be

Tank -> external filter -> chiller -> tank


Sent from my iPhone using Tapatalk

Thank you so much for your reply! What external filter would you reccomend?

Sent from my SM-G973F using Tapatalk

[genki89]

1 ft tank u can get boyu, ista and azoo.

But u will need to buy the converter for your tubing as all these external filter are using 12/16mm


Sent from my iPhone using Tapatalk

[Malodaus]

1 ft tank u can get boyu, ista and azoo.

But u will need to buy the converter for your tubing as all these external filter are using 12/16mm


Sent from my iPhone using Tapatalk

Thank you!!

Sent from my SM-G973F using Tapatalk