Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 17 of 17

Thread: CO2 setup

  1. #1
    Join Date
    May 2003
    Location
    Singapore
    Posts
    104
    Feedback Score
    0

    CO2 setup

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Hello everyone ,

    I plan to get a CO2 setup for my 3ft tank as I want my plants to grow well. I'm currently using DIY CO2 and I don't like it as it can't provide my tank with a constant supply of CO2 and also, I have no control over it. I have just invested in 2 sets of 36W*2 lights from Nature Aquarium.

    Where is a good place to get a CO2 setup? Any reliable brands to recommend? I hope to keep the cost below $200. I just need a simple set which lets me turn on and off the CO2 manually and also, for me to adjust how much CO2 to inject into the water.

    How often must I refill the tank and is it true that the refill charge for all tank sizes is the same? Where do you guys bring yr CO2 tank for refill and how long does it usually take? Can I get it back on the same day?

    Thanks.

  2. #2
    Join Date
    Dec 2001
    Location
    Balestier
    Posts
    2,769
    Feedback Score
    0
    Country
    Singapore
    You may want to give Chan of Nature a visit...but 200 bucks may be shaving alittle close...give him a visit anyway
    [email protected]
    ----------------------------------------------------------
    The title below my name does not make me a guru...listen at your own risk!...

  3. #3
    Join Date
    Apr 2003
    Location
    Singapore
    Posts
    95
    Feedback Score
    0
    Hi,

    I take that the lights are PL @ 36Watts each with nice aluminium casing ones?

    I saw at Petmart a few days ago, 2L tank plus regulator plus diffuser at $140-00 which I thought was a pretty good price for beginners like myself. Taiwanese made. Heard they're just as good.

    Can't answer the rest of your questions as I am still experimenting with 2 DIY Co2 for my 3 footer at the moment.

  4. #4
    Join Date
    Dec 2001
    Location
    Singapore, Singapore, Singapore
    Posts
    9,210
    Feedback Score
    0
    Images
    371
    Country
    Singapore
    $140 prolly comes with a manual regulator

  5. #5
    Join Date
    Apr 2003
    Location
    SINGAPORE
    Posts
    112
    Feedback Score
    0
    Country
    Singapore
    ----------------
    On 5/28/2003 12:24:53 AM

    Hello everyone ,

    I plan to get a CO2 setup for my 3ft tank as I want my plants to grow well. I'm currently using DIY CO2 and I don't like it as it can't provide my tank with a constant supply of CO2 and also, I have no control over it. I have just invested in 2 sets of 36W*2 lights from Nature Aquarium.

    Where is a good place to get a CO2 setup? Any reliable brands to recommend? I hope to keep the cost below $200. I just need a simple set which lets me turn on and off the CO2 manually and also, for me to adjust how much CO2 to inject into the water.

    How often must I refill the tank and is it true that the refill charge for all tank sizes is the same? Where do you guys bring yr CO2 tank for refill and how long does it usually take? Can I get it back on the same day?

    Thanks.


    ----------------
    are you Garlic? [:]

  6. #6
    Join Date
    Apr 2003
    Location
    Singapore
    Posts
    95
    Feedback Score
    0
    oh...got manual and auto version?

    i always thought you'd set the regulator once until the desired pressure then okay liao.

  7. #7
    Join Date
    Jan 2002
    Location
    Bukit Panjang
    Posts
    64
    Feedback Score
    0
    Country
    Singapore
    see PM..

  8. #8
    Join Date
    Dec 2001
    Location
    Singapura
    Posts
    2,214
    Feedback Score
    0
    Country
    Singapore
    Manual Regulator - This is a simple/basic regulator which cost relative low. With this regulator, the user have to open and close daily by hand. With this, the needle valve may get worn quickly and will not be able to give constant flow.

    Auto Regulator - It's a manual/basic regulator with a solenoid valve attached. This solenoid valve is controlled by electrical power; power on, valve open. This method, you dun have to frequently adjust the flow which is good to preserve the needle valve lifespan. This could be syncronised with the lighting to switch on together.

    Whenever anybody ask me which to recomend, I would always say get the Auto regulator. Cost more but worth the investment.
    Cheers!!

    Sherwin Choo
    [email protected]

  9. #9
    Join Date
    Aug 2002
    Location
    Singapore (CCK)
    Posts
    1,069
    Feedback Score
    0
    Country
    Singapore
    ----------------
    On 5/28/2003 12:32:53 PM

    oh...got manual and auto version?

    i always thought you'd set the regulator once until the desired pressure then okay liao.


    ----------------
    Setting a pressured CO2 system to stablise at your intended BPS is not easy. It takes time for it to stablise and requires tweaking of the regulating valve. The problem is compounded if you have a lousy regulating valve.

  10. #10
    Join Date
    Apr 2003
    Location
    SINGAPORE
    Posts
    112
    Feedback Score
    0
    Country
    Singapore
    ----------------
    On 5/28/2003 5:38:59 PM

    Manual Regulator - This is a simple/basic regulator which cost relative low. With this regulator, the user have to open and close daily by hand. With this, the needle valve may get worn quickly and will not be able to give constant flow.

    Auto Regulator - It's a manual/basic regulator with a solenoid valve attached. This solenoid valve is controlled by electrical power; power on, valve open. This method, you dun have to frequently adjust the flow which is good to preserve the needle valve lifespan. This could be syncronised with the lighting to switch on together.

    Whenever anybody ask me which to recomend, I would always say get the Auto regulator. Cost more but worth the investment.
    ----------------
    my Dennerle Profi 2000 is manual or auto? the box nvr state it.

  11. #11
    Join Date
    Dec 2001
    Location
    singapore
    Posts
    3,040
    Feedback Score
    0
    Images
    5
    Country
    Malaysia
    what are the items in your box?
    state them so we can help you.
    thomas liew

  12. #12
    Join Date
    Apr 2003
    Location
    SINGAPORE
    Posts
    112
    Feedback Score
    0
    Country
    Singapore
    ----------------
    On 5/30/2003 7:30:25 AM

    what are the items in your box?
    state them so we can help you.
    ----------------
    dennerle profi 2000, manual lor.

    anyway the box states:

    DENNERLE PROFI 2000 REGULATOR
    small, robust and dependable
    Legend:
    fitting for all co2 cylinders
    needle valve for fine adjustment
    cylinder pressure gauge
    operating pressure adjustment knob
    protection against overpressure: for your safety
    proved compression spring system with special diaphragm
    operating pressure gauge

    My regulatore is connected to dennerle night cut off solenoid. which means when the timer on, my light and solenoid on.

  13. #13
    Join Date
    Dec 2001
    Location
    singapore
    Posts
    3,040
    Feedback Score
    0
    Images
    5
    Country
    Malaysia
    if you read Sherchoo's post carefully, you would have found the answer yourself.
    your regulator plus the solenoid makes your system an auto system.
    thomas liew

  14. #14
    Join Date
    Apr 2003
    Location
    SINGAPORE
    Posts
    112
    Feedback Score
    0
    Country
    Singapore
    ----------------
    On 5/30/2003 12:35:57 PM

    if you read Sherchoo's post carefully, you would have found the answer yourself.
    your regulator plus the solenoid makes your system an auto system.
    ----------------
    ok thanks
    [:]

  15. #15
    heard from my friend, switching off the co2 is not really necessary, is that accurate?

  16. #16
    Join Date
    Dec 2001
    Location
    Singapore, Singapore, Singapore
    Posts
    9,210
    Feedback Score
    0
    Images
    371
    Country
    Singapore
    nwt, depends on the bubble per second, fish load.. since using of DIY doesnt allow the user to control the input of CO2, the input is constant there till it runs out... but if u r injecting in high bubble counts (compressed cylinder) then not advisable

  17. #17
    Join Date
    Feb 2003
    Posts
    39
    Feedback Score
    0
    Country
    Singapore
    there are sets of Manual regulater and 2 litre tank and diffuser and some ferts in a set sold in many lFS, at least i know C328 has it. Selling at $120 there abouts. Brand is Dymax so thia is also a good deal i feel. just my 2 cents worth.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •