Hello bros , just bought a chiller not long ago and was just wondering whether its working correctly. Model is cl 450 resun paired with Atman cf1200 . I set the temp to 24.5c(desired temp) and the chiller will start to kick in when the temp on the chiller display 25.5 .it takes ard 45 min to reach desired temp and intervals of 2 hours before the chiller kick again. Is it normal for my chiller to kick in at one degree difference?
Baton courtesy.....service with a smile!
Yes. You can adjust it if I'm not wrong but the 2hr switch off timing is very good already. If you adjust it to 2 degree difference, it might run longer to bring down the temperature. My own compressor chiller will switch on at 1 degree difference too but switch off for 2 1/2hr, it takes 25 minute to go from 26 degree to 25 degree celsius.
If you've learnt, teach, if you have, give.
Don't walk behind me as I might not lead, don't walk in front of me as I might not follow. Walk beside me, as my friend.
Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.
Thanks for the reply bro bfg , I'm so relived
Posting Permissions
Reply With Quote
Bookmarks