Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 3 of 3

Thread: Alage problem

  1. #1
    Join Date
    Jun 2003
    Location
    Punggol 21
    Posts
    64
    Feedback Score
    0

    Alage problem

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    Beginners Info Sheet
    --------------------

    Tank Dimensions (LxWxH): 895mm x 460mm 460mm
    Tank Volume (litres or gallons): 189.4L
    Lighting Intensity(No of Watts) : 182W
    Type of Lighting (FL/PL/MH) : PL Light
    No. of Hours your light is on : 5 hours on, 1 hr off, 5 hours on. From 12pm to 11pm
    CO2 Injection Rate (bps) : 2 bps for 11 hours same timing as PL light
    Type of CO2 (DIY/Liquid/Tank) : Tank
    Method of Injection (e.g. Diffusor/Reactor): Wann Hae Multi Derection CO2 Diffue Reactor
    Substrate Used :
    How Thick is your base fert : Use Hexa Root Grow about 10-15mm think
    How thick is your gravel : 60mm Think
    Liquid Fertilizers Used : JBL Ferropol. Use it when water change.
    Frequency of fertilization : Last used on 7 June 2003
    Tank Temperature : 27-28D
    Type of Filter (overhead/internal/canister) : Eheim canister
    Filter media used :
    How long has your tank been set up : 6 June 2003
    Other equipment : Cooler Fan, UV Sterilizer

    Chemical Properties (Fill what you can)
    ---------------------------------------
    Carbonate Hardness (KH): 6
    Total Hardness (gH):
    pH : 7.4
    NH4 (ppm): Normal
    NO2 (ppm): <0.3 mg/l
    NO3 (ppm): 0mg/l
    PO4 (ppm): 0.25-2.5mg/1 (light blue for sera test kit)
    Fe (ppm):

    Bioload (Your Fish and Plants)
    Fish:
    1) <10 oto
    2) 3 Ram, <5 glass shrimp
    3) 10 Green Tetra
    4) 1 SAE
    5) 1 Golden SAE
    6) Approx. 10 or more yamatos.
    7) 8 unknown fish

    Plants:
    1) 1 large Aponogeton Ulvacens,
    2) <15 stalk of different species of Bacopa
    3) <6 stalk of lysimachia nummularia ‘aurea’
    4) 1 aponogeton
    5) 2 cryptocoryne
    6) 1 echinodorus amazonicus or echinodorus horemanii (both look alike)
    7) about 8 stalk of hygrophila difformis
    1 nymphaea species ‘red’, mayaca fluviatilis
    9) lilaeopsis novaezelandiae
    10)ludwigia palustris
    ------------------------------

    Describe your problem:
    Grow spot algae on my wall tank & leaf. Some look like brush alage on the leaf & pipes. Thinking to buy 5 more SAE. It use to have 10, now 1 only. Any alage eater to eat that kind of alage? Water parameter should be ok cos yamatos still alive since July. Just increase CO2 to 3bps to decrease PH. If 3bps is not enough, can I increase to 4-5bps. Do I need to increase KH level also to meet 25 to 29ppm. Alage grow is it because of less CO2 level?

  2. #2
    Join Date
    Jan 2003
    Location
    Singapore, Singapore, Singapore
    Posts
    883
    Feedback Score
    2 (100%)
    Country
    Singapore
    ----------------
    On 9/28/2003 1:07:59 PM

    Beginners Info Sheet
    --------------------

    Tank Dimensions (LxWxH): 895mm x 460mm 460mm
    Tank Volume (litres or gallons): 189.4L
    Lighting Intensity(No of Watts) : 182W
    Type of Lighting (FL/PL/MH) : PL Light
    No. of Hours your light is on : 5 hours on, 1 hr off, 5 hours on. From 12pm to 11pm
    CO2 Injection Rate (bps) : 2 bps for 11 hours same timing as PL light
    Type of CO2 (DIY/Liquid/Tank) : Tank
    Method of Injection (e.g. Diffusor/Reactor): Wann Hae Multi Derection CO2 Diffue Reactor
    Substrate Used :
    How Thick is your base fert : Use Hexa Root Grow about 10-15mm think
    How thick is your gravel : 60mm Think
    Liquid Fertilizers Used : JBL Ferropol. Use it when water change.
    Frequency of fertilization : Last used on 7 June 2003
    Tank Temperature : 27-28D
    Type of Filter (overhead/internal/canister) : Eheim canister
    Filter media used :
    How long has your tank been set up : 6 June 2003
    Other equipment : Cooler Fan, UV Sterilizer

    Chemical Properties (Fill what you can)
    ---------------------------------------
    Carbonate Hardness (KH): 6
    Total Hardness (gH):
    pH : 7.4
    NH4 (ppm): Normal
    NO2 (ppm): <0.3 mg/l
    NO3 (ppm): 0mg/l
    PO4 (ppm): 0.25-2.5mg/1 (light blue for sera test kit)
    Fe (ppm):

    Bioload (Your Fish and Plants)
    Fish:
    1) <10 oto
    2) 3 Ram, <5 glass shrimp
    3) 10 Green Tetra
    4) 1 SAE
    5) 1 Golden SAE
    6) Approx. 10 or more yamatos.
    7) 8 unknown fish

    Plants:
    1) 1 large Aponogeton Ulvacens,
    2) <15 stalk of different species of Bacopa
    3) <6 stalk of lysimachia nummularia ‘aurea’
    4) 1 aponogeton
    5) 2 cryptocoryne
    6) 1 echinodorus amazonicus or echinodorus horemanii (both look alike)
    7) about 8 stalk of hygrophila difformis
    1 nymphaea species ‘red’, mayaca fluviatilis
    9) lilaeopsis novaezelandiae
    10)ludwigia palustris
    ------------------------------

    Describe your problem:
    Grow spot algae on my wall tank & leaf. Some look like brush alage on the leaf & pipes. Thinking to buy 5 more SAE. It use to have 10, now 1 only. Any alage eater to eat that kind of alage? Water parameter should be ok cos yamatos still alive since July. Just increase CO2 to 3bps to decrease PH. If 3bps is not enough, can I increase to 4-5bps. Do I need to increase KH level also to meet 25 to 29ppm. Alage grow is it because of less CO2 level?

    ----------------
    Hi there,

    I am no expert here first and foremost. Your water's parameter, 6 KH is a little high, meaning you would have to inject more CO2 in order to reach the desired pH value. One more thing, what's with your NO3 value? Did you measure or it is really at 0ppm? At 0 ppm, means that plants are not able to utilise the trace elements in your tank. Nitrate is also essential for good growth. Anyhow, my suggestion is for you to supplement NO3 through increased fish load or through addition of calcium nitrate, etc.

    Be careful what you add into your tank though! Try to keep yout nitrate ranging about 5-20mg ideally.

    Personally, I been fighting algae all this while in this hobby. Appearance of algae is often due to 2 reason

    1. Lack of certain traces
    2. Abudance of certain traces.

    In many cases, the first case generally applies.

    Hope it helps and have fun fighting algae.

    Edwin Poh.C.W
    Aquaplantnutx, AquaticQuotient
    Check out Wynx' Blog
    Check out Wynx' Gallery
    When fate hands you a lemon, make lemonade.
    Dale Carnegie
    "Who cannot love Her smallest things cannot stand in front of Nature" 隆あまの 

  3. #3
    Join Date
    Jul 2002
    Location
    Singapore
    Posts
    4,088
    Feedback Score
    0
    Country
    Singapore
    Eric_thian, your problems are as followed..

    1)Lack of CO2 in a high light tank....(You need more CO2 here...get it to 20-30ppm range throughout the entire photoperiod..solve this one or nothing else works well.)

    2)Use a constant photoperiod and no breaks in between.

    3)Trusting an amature test kit...? Estimate the dosing would yield a closer range couple with a large water change at the end of the week.

    Trim the plants affected with algae and then do a large water change after that...
    Correct the CO2...
    Add 1/4+ tsp of K2SO4 after water change only
    Add 1/2+ tsp of KNO3 2-3X per week
    Add 12ml of JBL ferropol 2-3X per week (This you may have to test the range by dosing a certain amount to a fix volume of tank water and then up the dose after 3-4weeks to see if you see any improvement in plant growth of textur. JBL ferropol has high K perharps so I lower the K dosage from K2SO4...you might need more..)
    Add 3 rice grain of KH2PO4 2-3X per week
    At end of week do a large 50% water change and repeat the whole procedure.
    It works... Just get the stuff needed.
    Plant Physiology by Taiz and Zeiger

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •