Is the needle at zero? If it is, likely there is a leak and your tank is already empty. Likely it is the regulator that is spoilt. Mine had this problem and I got it repaired at NA for $5.
 Veteran
					
					
						Veteran
					
					
						

 
					
                                        
					
					
						
Bros, pls help: recently I went to refill trade my tank and after 1 week plus, my manual regulator needle keep dropping n gas supply sometimes cut off And I have readjust. After 2nd week, the needle drop to zero and no gas has came out. I tried lifting up the cylinder is still seem heavy. Is the tank fault ot my regulator spoilt? I try detaching the regulator from the tank n turn the cyclinder value but never hear has rush out? What could be the problem? Any advice and also recommended affordable place to get my regulator from and also is manual or automatic ones good?
 Member
					
					
						Member
					
					
						 
					
                                        
					
					
						
Is the needle at zero? If it is, likely there is a leak and your tank is already empty. Likely it is the regulator that is spoilt. Mine had this problem and I got it repaired at NA for $5.
 Regular
					
					
						Regular
					
					
						
 
					
                                        
					
					
						
Could be a leak at the valve on the tank.Happened to me too...the uncle mentioned it to me when i refill my tank at Bioplast...got it repaired foc

get proper regulator, save you lots of trouble
 Veteran
					
					
						Veteran
					
					
						

 
					
                                        
					
					
						
Icici. Thanks all, think I shall get it repair. I went back to my regular he din provide solution n want to say can check but check need 20 bucks. I'm quite annoyed anyway. And I feel should let me know first place and now tank empty and should have compensate me one free load.so bros, how much refill at bioplast and location is it at kovan? Yours are manual regulator?
 Veteran
					
					
						Veteran
					
					
						

 
					
                                        
					
					
						
Needle drop till 10 and stuck there.
 AQ Staff
					
					
						AQ Staff
					
					
						




 
					
                                        
					
					
						
bioplast is located at blk 22 boon keng road.
it's actual name is System & Control Engineering.
try checking with them if they can check you cylinder for you.
thomas liew
If you've learnt, teach, if you have, give.
Don't walk behind me as I might not lead, don't walk in front of me as I might not follow. Walk beside me, as my friend.
Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.
Bookmarks