Reply With QuoteAttachment 27400 i notice there is 2 inlets at the bottom on the canister. are the pipings damaged? i need some help here. really don't know what to do
Hi guys, i need some help in setting up this canister. i've taken some pictures for easy self explaination of what i have. pump is an eheim 1260.
1) i think some parts are broken and i need to glue it back. the pump holder(i think) need to be glue back i think but i don't know which is the proper position. pls advise me.
2) i don't know are the pipings/hose shown here are usable or not? do i need to replace them? what must i get? need any screws/nuts for the pipings or pump holder?
thanks alot!
Attachment 27400 i notice there is 2 inlets at the bottom on the canister. are the pipings damaged? i need some help here. really don't know what to do
Wow that looks like a very old model. Is it even an Eheim other than the pump?
The pump looks incompatible anyway... the top pipe and the filter input don't line up right?
Plus you mentioned you have to glue stuff back... I'd not risk using it personally
Baton courtesy.....service with a smile!
Seen this before. One of the bottom hose is the intake while the other function to release the water as it would be too heavy to carry that canister full with water. The pump is placed above and the whole canister works the same as the Eheim Classic series. Where did you get this from?
If you've learnt, teach, if you have, give.
Don't walk behind me as I might not lead, don't walk in front of me as I might not follow. Walk beside me, as my friend.
Mohamad Rohaizal is my name. If it's too hard, use BFG. I don't mind.
Posting Permissions
Bookmarks