Hi anyone using this model to hook up your hailei chiller?
the cable is white and black with metal probe.
saw wordings is at black cable side.
- so burning question is which cable to red and black to sensor of chiller display.
or actually any success with this type?
NTC based i presume.
beocause i couldnt get the best result from my external prode. Pls help.
there will be a big different in result (more than 1.5deg )or the chiller will always chill and stuck at (exp : 25.1deg and not goin down to 25deg which is set temp, temp of tank : 23.1deg...)..... not sure what went wrong .- wiring : white to red, black to black.
NOw testing black to white , red to black as black side got white wording.
put back internal prode no such problem....but much frequecy kick in with diff of 1.0....
http://www.arofanatics.com/forums/sh...d.php?t=470139
last round used the one in the pic attached...at first is good......then later super big diff in reading. 18deg - tank, 32deg in chiller....always chilling....test contact short....my cable no wording so both cable all silver haha....
i thought it was ok last time
Posting Permissions
Reply With Quote
Bookmarks