Advertisements
Aquatic Avenue Banner Tropica Shop Banner Fishy Business Banner
Results 1 to 2 of 2

Thread: No need to dose K2SO4/KCl unless........

  1. #1
    Join Date
    Feb 2003
    Location
    USA
    Posts
    1,198
    Feedback Score
    0
    Images
    7
    Country
    United_States

    No need to dose K2SO4/KCl unless........

    Advertisements
    Fresh n Marine aQuarium Banner

    Advertise here

    Advertise here
    This is a repost of mine:

    If you dose a fair amount of NO3 via KNO3, keep nice tank parameters, don't have much fish load, I'd suspect you don't need to add K separately.
    Steve and I did this for awhile, there were times when folks could not get any K2SO4 around the area, so we did without.

    We never really found much difference.Steve suggested we did not need any extra K as it was being supplied via KNO3.

    Some products have K+, like TMG.
    I find it unlikely you really need MORE K+ to grow plants well and ************it's one less thing that folks need to dose which is my goal here****.
    Looking at a mass balance of N/K+ ratios, __most/many__ plants have about 1.5 :1 ratios of N:K(Epstien 1972).

    Now take into account the O3 part of NO3 and to get elemental N and you suddenly find you have plenty of K+ for plant growth.
    So 1.5/4.4= .34 N's for every K+ you add.

    So you should theoretically have 3x as much K as you need relative to N x the 1.5/1 ratio = 4.5x as much K+ relative to N per dose.

    I did it correctly and it should be about 4.2:1, K:N being dosed.

    There are other sources of N, plant decomposition, fish waste but some K+ comes from these pools also.
    I really do doubt that adding K2SO4 to such a tank will make any significant difference.

    Unlike NO3 and denitrifying bacteria NO3=>N2 gas, there is not much to the K+ cycle except for plant uptake/leaching.

    So it certainly is something folks can skip if they add KNO3 as their main source of N.

    Now if you have a good fish load, over feed Discus, slow growth/non CO2 etc, adding K+ from KCl/K2SO4 is advisable since you already will have plenty of NO3.

    But for many, KNO3 as the source of both N and K should do the trick.

    I'd say you simply don't need but 3 things, KH2PO4, KNO3 and traces.
    And then the other two parts: Light and CO2.

    I'm glad Ghori brought it up as I've not thought about it since I guess 1997 or so. But going through it, it should not be a problem even with all the different plant species needs and possible extra K+ needs a plant might have.

    I think it's be EVEN easier for the new folks and us too, to delete one more nutrient from the mix.

    That is a GOOD GOAL.

    The goal is to reduce down with simpler designs/methods/dosing routines for folks that still work very well.

    Importantly:
    Just remember if you have NO3 issues from the tap/fish load, you will still find a use for K+ dosing from KCl or K2SO4.

    Regards,
    Tom Barr

  2. #2
    Join Date
    Nov 2002
    Location
    Singapore
    Posts
    1,229
    Feedback Score
    0
    Images
    38
    Country
    Singapore
    Tom,

    Good spirit, keep it up!


    Regards,
    Freddy Chng

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •