Setting up chiller

[felix_fx2]

Andy, is it a brand new one or used one?
if new make sure the canister is working, use a bucket filled with water. If not working, maybe the powerhead blew.
Still have warranty if it's brand new, if 2nd handed better check the bro/sis whom you get it from.

good luck

I guess i too "chim" ...

[Andy Woo]

I guess i too "chim" ...

Sorry, I dont get what you mean bro.Are refering to the canister or the chiller is new?

[felix_fx2]

I use my nose try to smell where is burning smell from, the smell actually from the filter

when you say that, i thought canister spoilt..no worries...important is you know what spoilt..
normally if i suspect canister pump spoilt, i will take it in turn it on in the water so i can see 1st hand if the impeller will turn or not. if impeller never break but don't turn = power-head spoilt.

no chance to play with chiller, so don't know how the insides are.

[Andy Woo]

when you say that, i thought canister spoilt..no worries...important is you know what spoilt..
normally if i suspect canister pump spoilt, i will take it in turn it on in the water so i can see 1st hand if the impeller will turn or not. if impeller never break but don't turn = power-head spoilt.

no chance to play with chiller, so don't know how the insides are.

Oh I see , my canister is working fine . Today after work will try to open up the chiller and see where the burn come from .