Bro, there is no way that Eheim Aqua compact is going to be strong enough to push water through your chiller.
You don't have to switch off the chiller at night, it'll not kick in if the temperature is cool enough.



Hi all, would like to check the compatibility of my eheim aqua compact 40 and Teco TR 15 chiller for a 2ft tank.
This tank is in my room, in the night the Aircon will be on temperature of tank would be at 23.5-24 degree C.
Question: do I need to switch off my chiller in the night?
: does the two match regards to the flow rate and the kick in and out.
: what is the temperature to set it on the chiller (I intend to set it at 25 for CRS) due to power consumption
: this chiller is sec hand thinking of buying over have use for 6 months and warranty for another 2 half yrs. what is the reasonable price to offer.
: lastly the noise level any review by experience user.
Thanks for all the help.
Currently tank is in my office intend to shift it back home. Any advice?
Enjoying every mins of the process. Happy Shrimping.
Bro, there is no way that Eheim Aqua compact is going to be strong enough to push water through your chiller.
You don't have to switch off the chiller at night, it'll not kick in if the temperature is cool enough.





Bro your teco tr 15 need a min 500 lph pump to push thru.



ops what should i do?
Enjoying every mins of the process. Happy Shrimping.



Hi Bros thanks for the reply, if i will to go for classic eheim canister which model will you recommend or and other models which is better like the pro series.
The original price for teco tr 15 is around $750.00, do your think $450 is a good offer. Thanks
Enjoying every mins of the process. Happy Shrimping.










How do u intent to do for the outlet of your tank? If rain bar you can use 2217 because you can fill the canister with medias and connect with the chiller and there is still enough power for your 2ft

Tr 15 can jolly well work good on a 2213 and above.![]()
On the side note, demand or the warranty card WITH the distributor's chop. Qian hu will not accept without its chop as there are parallel import.
Zack


what about using Ecco Pro 130?















Hi Recca, have thought of pro series but read out is a bit more expensive than classic. I think classic is easier to maintain share by experience user here.
Most likely will go for classic model.
Thank for your recommendation will do a proper comparison before deciding.
Cheers![]()
Enjoying every mins of the process. Happy Shrimping.


Bro, i'm not referring to the Professional series like 2 & 3. Those are the high end range. I am talking about Ecco Pro, its a middle range between classic & Professional with the valve control & self-primer. If i recall correctly, with classic, you need to buy the valves & probably additional tubes to attach them to fit (for hassle-free maintenance), and you need to purchase your own medias too. Ecco Pro valve system really made a difference for me.Just my 2 cents worth.





Actually the classic design a nice design as compare.
Classic does come with media have a check at seaview but like you mention need purchase additional valve for maintances hassle.
Ecco design is I m afraid that it doesn't really push the wash thru the media as we know water pressurize my the pump head will tend to look for the shortest way out.
Like the other pro series their basket for media have a hollow part aim for the pump meaning water suck from tank push to bottom of canister than flow thru media towards the output hole. Ecco doesn't seem to be design that way.
Which is why I decomm the Ecco and change to classic



Yes, i agree with bro Avex30.
I've a 2215 packed with small ceramic rings at the lowest bottom. Then big ceramic rings on another layer. Lastly, 2L of substrate pro that fills to the top. My flowrate is not as ideal. Furthermore, i've attached a APA Prefilter prior to this 2215 canister.



Sorry don't quite understand the 'additional valve' what is the purpose of it.
I think Ecco pro 130 is name in Singapore Ecco pro 2032. Read some review and YouTube they have leaking problem. Check out the cost is $180 vs $200. If it give me leaking problem I might not consider.
Have read through the specs Ecco pro 130 or 2032 is good power saving aswell 5watts comsumption and is easy to setup.
Enjoying every mins of the process. Happy Shrimping.



Bro Paladin thanks for sharing your experience. That is what I want, don't want the flow rate to be strong. Just a very gentle flow rate will do because want it to be as quite as possible. So water output will definitely be under water and it will not stress the shrimp so much.
Cheers![]()
Enjoying every mins of the process. Happy Shrimping.
Bookmarks