Don't think you can get lightning from LED! Hahaha! jk
I'm using BeamsWork LED 1600 (27W) for my 2ft tank. Pretty strong lighting.![]()




Don't think you can get lightning from LED! Hahaha! jk
I'm using BeamsWork LED 1600 (27W) for my 2ft tank. Pretty strong lighting.![]()

hahaha thanks!
where did you get it???



Got mine from Sea View Aquarium (Singapore) Pte Ltd.
Here's the location:
https://maps.google.com.sg/maps?q&la...CA&gl=SG&hl=en

Hi,
Is the Beamwork LED lighting comparable to PL lighting for planted tank with CO2? Fish shop owner was discouraging me to buy it for planted tank BECAUSE he said that he has never been successful with LED for planted.
Has anyone used LED and able to achieve bubbling or pearling by plants? I am thinking whether to upgrade to LED or PL. I like the shimmering effect of LED...
Last edited by felix_fx2; 18th Sep 2012 at 13:08. Reason: sms lingo

Some LED are applicable for planted.
If the wattage is less then 1watt for each led, maybe better to play safe and do a low tech 1st.
Think Beamworks not bad, but mid to low tech it will serve the use well.
High tech wise, not really sure (but if you try hehehe we will know)
Fixture Size: 35.00" x 5.00" x 1.00" (Add 0.65" in height with bracket installed)
LED Count: 129
600 Lumens
Super energy efficient .06 watt LEDs
121x 10,000K LEDs
8x Actinic 460nm LEDs
Use 9 watts
Learning the hardway, not the highway.
Photo Blog - impervious-endeavors.blogspot.com
Semi-Active currently
"if he cant be bothered to take the time to write his question properly, why should I take the time to answer him."

Hi Felix, Thanks for sharing the details on this Beamworks LED.
Do you have the model for this ?
I am surpised that it uses only 9W... so far i see mostly more than 25W and above for 3 feet and above LED...
Truth lasts for Eternality and lies are just waiting to be discovered.
http://bravobb-aqua.blogspot.sg/

the beamswork 1600 is a higher powered one i think. 1460 lumens. probably stronger than what felix above has mentioned. will likely support plant growth i think.



Yup, BeamsWork LED 1600 (27W) is suppose to have double the power. The lumens is around +-10% 1600 which is higher than a T5 tube of equivalent length. Here's the url with more detailed specs on the item:
http://freshnmarine.com.sg/estore/pr...oducts_id=3759
As for pearling, I've seen them regularly on the Riccia fluitans (on wire mesh) and Marimo ball! Phew I'm learning the names of my plants now, DON'T KNOW what they were when I got them.![]()
Last edited by felix_fx2; 18th Sep 2012 at 22:29. Reason: Sms lingo

LEDs are suppose to be "energy saving" when compared to PL/T5/MH
I won't be suprised.
Must see what the performance of the many models of beamworks fitting 60CM tanks. The lower models still would support low requirement plant, where you come to the fact that if you try to grow high requirement plants the problem may start.
Note: Before you commit to spending, look at the very long run. Wattage of per LED, Replacement parts and such. It just might change your view.
I've extracted some info for the few here, for bravobb
BEAMSWORK Power LED 400 (78x0.06W) 60cm
Specifications
Dimensions 572 x 125 x 23 mm
Brackets add 0.50″ in height
Supports 72x10000K daylight, 6xactinic 460nm
Input AC120V - 240V
Output DC12V 500mA
Lumens 400
Individual power cord for each function
Extendable bracket
BEAMSWORK Power LED 1600 (27W) 60cm
Specifications
Dimensions 23.00" x 5.00" x 1.00"
Brackets add 0.65" in height
Supports 23x 10000K daylight, 4x actinic 460nm
Super energy efficient 1 watt HQ LEDs
Lumens 1670
Input AC120V - 240V
Output DC12V 500mA
Individual power cord for each function
Extend up to 30" in length with bracket installed
And others folks: hello watch what you type.
After looking, Go find out the price yourself.![]()
Learning the hardway, not the highway.
Photo Blog - impervious-endeavors.blogspot.com
Semi-Active currently
"if he cant be bothered to take the time to write his question properly, why should I take the time to answer him."

Thanks Felix... appreciate your efforts.
If i calculate correctly, the LED 400 uses only less than 5W? That is less than one sing dollar even if you switch on 24/7 a month...
I am going to use it on my 5 feet tank (actually is 4.5 after minus the IOS) and the dimension is fine. I just sit the LED on the glass cover.
Only concern is whether both LED lights coverage in term of its angle and also what is the purpose of Lumens ? I thought 10000K daylight is bright enough and should be able to reach even the bottom seating plants or gravel ?
Truth lasts for Eternality and lies are just waiting to be discovered.
http://bravobb-aqua.blogspot.sg/





The BeamWorks models do not come with optics & the spread will be all over the place, i.e. you get very good coverage but weak PAR.
Lumens is how bright a light source is.
You are confusing color temperature with brightness. 10000K is a measurement of a light source colour temperature in terms of Kelvin.
Unless your 5-foot tank is ridiculously deep, the Beamworks should be able to illuminate till your substrate level, but whether the PAR & PUR is good enough for intense plant growth, is another matter.
Bookmarks