**DIY ADA Style 60p Stand meets Exotic Woods**

[Sapherion]

Hi all,

I'm new to this hobby again and wanted to start off with something different. I have come across many DIY ADA style stands made from MDF or Plywood or Pine.. but what about mother natures' beautiful exotic woods?.. I live in Australia and we have some beautiful species and this one is my favourite so far:

Blackheart Sassafras Description:
Sassafras grows as an understorey tree in Tasmania's wet mixed forests and rainforests but also grows in Victoria and New South Wales. Timber from the plain sassafras logs was once used for clothes pegs because they do not contain any tannin. Today sassafras is famous for its spectacular black-heart stain caused by naturally occuring wood fungi which produces a range of contrasting brown to black colours in the heartwood.
Black-heart sassafras timber is used in wood turning, furniture, joinery, for veneers and in many souvenir items. Creative veneer lay-ups can produce stunning effects with even slight amounts of heart stain. Spalted sassafras timber, fine dark lines caused by stain fungi in the log after harvesting, is also attractive and popular in craft and furniture items. (Taken from IST Australia)

I have been able to source a small quantity just enough to make this cabinet. Before purchasing any woods to use for furniture, make sure its been kiln dried, seasoned and has a complete flat surface with no warping or cupping in the wood. Otherwise its not usable and cannot be joined properly and you will have a "wonky" cabinet.

Dimensions are 600mm Length x 300mm Wide x 650mm High x 18mm Thick.

First task was to surface plane all the required pieces, pair them up with familiar patterns on each side and cut the panels to size. Here you can see the beautiful natural tones and colours in this blackheart wood.




Next was to join the wood and give it strength in between the joints so we dont get pieces warping or moving once complete. I chose to make biscuit joints and use size 20 biscuits for this project and titebond III glue.




I used 4 biscuits between each join.



Next clamp all the pieces together to form a tight and straight fit. Leave to dry for 24 hours before sanding



Here's the finished back piece. Will look wonderful once finished using pure danish or tung oil. Note the pairing of wood to make it look more natural and not so out of place.




To be continued..

[Sapherion]

Apologies about the delay and pics, had to host on a different server

Here is an update. I've finally joined all the required pieces and cut to size.
Cutting the service holes wasn't fun, but it had to be done!
Then biscuit joined all the panels together remembering to use an 90' angle ruler to keep things square and in check.
Next step was giving it a good planing and sanding. Here is the almost finished product before the final oil finishes.
For extra strength and stability, i've added L brackets screwed up on all corners.

Enjoy!

[seudzar]

Very nice wood grain you have there

[alvinchan80]

The cabinet looks great with the nice wood...

Keep the updates coming...

[Cheesetian]

Personally i feel the inside of the front panel would have been better on the outside. Nonetheless this is a very nice cabinet you got there!

[David Moses Heng]

Can I order one from you??Excellent piece of work there mate!!

[Sapherion]

Thanks guys!.. More updates to come soon, the final front piece of the door will be the finisher!..

And of course, i'll be happy to take custom orders once complete *Flat packed of course*

[AQMS]

excellent work!!!
i want to see the finished stand.
update us.

[hiisoka]

excellent material selection and finishing!
can't wait to see the finished setup!

[tetrakid]

Skillfull cabinetry at its best.

[felix_fx2]

Nice grain on this wood used.

[mukyo]

This is really a diy that is out of league..
You are darn good man...

--------------------------------------------------------
visit my photo thread and critics please
http://www.aquaticquotient.com/forum...ad.php?t=97006
"... thanks will always be given for helping me..."

[newlife]

Simply love the grains...
Great work done!!

[Sapherion]

Apologies about the delay and pics, had to host on a different server

Here is an update. I've finally joined all the required pieces and cut to size.
Cutting the service holes wasn't fun, but it had to be done!
Then biscuit joined all the panels together remembering to use an 90' angle ruler to keep things square and in check.
Next step was giving it a good planing and sanding. Here is the almost finished product before the final oil finishes.
For extra strength and stability, i've added L brackets screwed up on all corners.

Enjoy!

[Sapherion]

Update - I managed to get off work early today.. so straight to the workshop to finish construction of the stand.. I fitted the concealed hinges then lined up the door and finally complete before the final sanding and oiling/buffing. Can anyone recommend a good finish?..
Enjoy!









Since this timber is called Blackheart Sassafras, I wanted to show the blackheart growth displayed in contrasting colours at the centre of the door, just as in nature where its grown from the centre of the tree.



Also, here is a sneak peek of the next cabinet's timber. Tasmanian Huon Pine.. more details to follow soon!

You can see the timber currently seasoning in my workshop on small wood racks to circulate air and acclimate temperature and moisture conditions. This Huon pine was milled from a 2000 yr old tree then air dried for over 40 years before being milled into boards you see below. The smell of Huon oil coming from this timber is amazing.. I wonder if it would make your living room smell like a bit of nature if it was made into furniture??



Here is a planed, dressed and sanded piece of Huon Pine ready for construction.



Notice the lovely grain on this timber



Cheers,

Saph.

[Sapherion]

Oh yes, definately must have driftwood!

Thanks all for the tips and kind comments!

Update: Did final sanding and oiled up first coat.. In the end I opted for a satin finish, using Danish Oil and will polish after 5-6 coats. Will recoat after 24 hours.

Enjoy!

[AQMS]

Good job!!

[Loudness]

really beautiful DIY, you are in australia or singapore?

[David Moses Heng]

Seriously how much would cost me to have them shipped over?

I am wow by your handiwork.

[AQMS]

yes! how much will it cost to ship the wood here.
I am interested too..