










Hi guys,
Good job! I just have some comments on the fans. Since LEDs are used, you may not need that many fans, personally, I think it is a little of an over-kill.![]()
- eric
i agree on the fans...use the space to put more lights.
Just wondering that if you're actually making your own light set..why not make it with variable lighting options..like...able to choose how many panels you want to light up?? just a thought...
Any reason for choosing the LED for the lights? My understanding is the lumen output of the LED is much lower as compared to compact fluorescent and so is the lumen/Watt. It will be interesting how the plants will react but I got a feeling that there may be insufficient light.

Each DIY project is a learning opportunity.
So I guess the it doesn't really matter if the students get the number of fans, direction of airflow, choice of lights right on the first try. In fact, the more mistakes, the more learning![]()
- eric











dear all... here's another pic with 3 panels of lights ready, with our very dedicated workshop instructor at the background... will put up at least another 2 panels of light... making a total of at least 200 LEDs.
If you look carefully... you will notice 3 localised spots at the bottom of the tank... comments and learning points from the experts? This pic was taken with all the room lights switched on, during daylight conditions.
As for measurement of whiteness of light, does any one have a meter to do so? Or some form of conversion that you could recommend?
Cheers

using LED for planted tank is new teritory, not sure if anyone have ever experimenting with it before. So it is interesting to see the progress
I assume the picture is without water, the intensity will be reduce once the water in.






It would be good to start searching for driftwood now as it is going to take some time to find a suitable ones, not mentioning the time required to make them sink.
In the meantime, it may be a good idea to have the students to start doing study/research on various aquatic plants.
Just my 2 cents.
Cheers,
U.K.Lau

my driftwood is ever ready for collection....
-clint- ~apisto keepers unite!~





For optimum plant growth(ie. photosynthesis) it is very important to have a light source containing the red (640 to 650nm) and blue (420 to 460nm) wavelengths of the light spectrum. If the LED lights do not include these wavelengths, plants will not do well eventhough the lights may appear bright to human eye. Check the manufacturer's brochure/manual for the light spectrum chart.

you can get the data sheet, assuming you know the LED manufacturer
Link below is white LED fom Avago (previously Agilent)
http://www.avagotech.com/products/pa...und_5mm_white/
Unfortunately 640 to 650nm not that high, other brand may have different spectrum though. keep the finger cross.










Previously, I explore the LED lightings with my friends. We also feel it does not have the penetration depth unless the tank is shallow.
Interesting... more update on the LED lighting please![]()



Hi Bro,
I had an almost 1ft Walking Catfish (Torsat) which has grown from a feeder pack for my birchir. I'm thinking of giving it away to anybody that is interested, and thought of asking you first...Just bare in mind thou that it is a big eater...
![]()
Bookmarks